Welcome to the Bartels Group of Companies make this page your Homepage... add this page to your Favorites... send this page to a friend... display printer friendly page... display sitemap... display sitemap with all page contents...
PCB-Design-Systemfunktionen - Deutsche Version PCB Design System Functions - English Version
Bartels

Bartels System GmbH
Bartels
Bartels AutoEngineer
BAE Product Info
BAE Price List
BAE Downloads
BAE Documentation
BAE Installation Guide
BAE User Manual
BAE Libraries
User Language Programmer's Guide
Preface
1 Introduction
2 Language Description
3 Programming System
4 BAE User Language Programs
A Conventions and Definitions
B Index Variable Types
C System Functions
C.1 Function Reference
C.2 Standard System Functions
C.3 SCM System Functions
C.4 PCB Design System Functions
C.4.1 Layout Data Access Functions
C.4.2 Layout Editor Functions
C.4.3 Autorouter Functions
C.4.4 CAM Processor Functions
C.4.5 CAM View Functions
C.5 IC Design System Functions
BAE Update History
BAE Next Version Release Notes Preliminary
BAE V8.0 Release Notes
BAE V7.8 Release Notes
BAE V7.6 Release Notes
BAE V7.4 Release Notes
BAE V7.2 Release Notes
BAE V7.0 Release Notes
BAE V6.8 Release Notes
BAE V6.6 Release Notes
BAE V6.4 Release Notes
BAE V6.2 Release Notes
BAE V6.0 Release Notes
BAE V5.4 Release Notes
BAE V5.0 Release Notes
BAE V4.6 Release Notes
BAE V4.4 Release Notes
BAE V4.2 Release Notes
BAE V4.0 Release Notes
BAE V3.4 Release Notes
BAE Support
BAE Contributions
BAE Development and Service Companies
Electronics Development
Bartels Sport Service
Company Profile
Corporate Info
Bartels :: Bartels AutoEngineer :: BAE Documentation :: User Language Programmer's Guide :: System Functions :: PCB Design System Functions
Bartels User Language - Programmer's Guide

C.4 PCB Design System Functions

Bartels AutoEngineer® Dokumentation

This section describes (in alphabetical order) the PCB design system functions of the Bartels User Language. See Appendix C.1 for function description notations.

 

C.4.1 Layout Data Access Functions

The following User Language system functions are assigned to caller type LAY; i.e., they can be called from the Layout Editor, the Autorouter and the CAM Processor interpreter environment of the Bartels AutoEngineer:


lay_defelemname - Layout setup default element name (LAY)

Synopsis
string lay_defelemname(       // Returns default layout element name
      );
Description
The lay_defelemname function returns the default layout element name defined in the BAE setup file.

lay_deflibname - Layout setup default library name (LAY)

Synopsis
string lay_deflibname(        // Returns default library name
      );
Description
The lay_deflibname function returns the default layout library name defined in the BAE setup file.

lay_defusrunit - Layout setup default user units (LAY)

Synopsis
int lay_defusrunit(           // Returns default user units (STD7)
      );
Description
The lay_defusrunit function returns the default user units mode defined in the BAE setup file (1=Inch, 0=mm).

lay_doclayindex - Layout documentary layer display index (LAY)

Synopsis
int lay_doclayindex(          // Documentary layer display index
      int [0,99];             // Documentary layer number
      );
Description
The lay_doclayindex function returns the documentary layer display index for the specified documentary layer, or (-1) if an invalid documentary layer number was specified.
See also
Functions lay_doclayname, lay_doclayside, lay_doclaytext.

lay_doclayname - Layout setup documentary layer name (LAY)

Synopsis
string lay_doclayname(        // Returns documentary layer name
      int [0,99];             // Documentary layer number
      );
Description
The lay_doclayname function returns the documentary layer name defined in the BAE setup file for the specified documentary layer number.
See also
Functions lay_doclayindex, lay_doclayside, lay_doclaytext.

lay_doclayside - Layout setup documentary layer side mode (LAY)

Synopsis
int lay_doclayside(           // Returns documentary layer side mode:
                              //    (-2) = invalid layer number
                              //    (-1) = none
                              //    ( 0) = side 1
                              //    ( 1) = side 2
                              //    ( 2) = both sides
      int [0,99];             // Documentary layer number
      );
Description
The lay_doclayside function returns the documentary layer side mode defined in the BAE setup file for the specified documentary layer number. Documentary layer side mode (-1) refers to None (i.e., Side 1, Side 2 and Both Sides are selectable), mode 0 refers to Side 1, mode 1 refers to Side 2, mode 3 refers to Both Sides. The function returns (-2) if an invalid layer number has been specified.
See also
Functions lay_doclayindex, lay_doclayname, lay_doclaytext.

lay_doclaytext - Layout setup documentary layer text mode (LAY)

Synopsis
int lay_doclaytext(           // Returns doc. layer text mode (LAY2)
      int [0,99];             // Documentary layer number
      );
Description
The lay_doclaytext function returns the documentary layer text mode (LAY2) defined in the BAE setup file for the specified documentary layer. The function returns (-1) if an invalid layer number has been specified.
See also
Functions lay_doclayindex, lay_doclayname, lay_doclayside.

lay_figboxtest - Check layout element rectangle cross (LAY)

Synopsis
int lay_figboxtest(           // Returns status
      & index L_FIGURE;       // Element
      double;                 // Rectangle left border (STD2)
      double;                 // Rectangle lower border (STD2)
      double;                 // Rectangle right border (STD2)
      double;                 // Rectangle upper border (STD2)
      );
Description
The lay_figboxtest function checks if the given figure list element crosses the given rectangle. The function return nonzero if the element boundaries cross the given rectangle.

lay_findconpart - Find layout part index of a named part (LAY)

Synopsis
int lay_findconpart(          // Returns status
      string;                 // Part name
      & index L_CPART;        // Returns part index
      );
Description
The lay_findconpart function searches the layout connection list part index with the specified part name. The function returns zero if the part has been found or nonzero otherwise.
See also
Functions lay_findconpartpin, lay_findcontree.

lay_findconpartpin - Find layout part pin index of a named part pin (LAY)

Synopsis
int lay_findconpartpin(       // Returns status
      string;                 // Pin name
      index L_CPART;          // Net list part index
      & index L_CPIN;         // Returns net list part pin index
      );
Description
The lay_findconpartpin function searches a layout connection list part for the part pin index with the specified pin name. The function returns zero if the part pin has been found or nonzero otherwise.
See also
Functions lay_findconpart, lay_findcontree.

lay_findcontree - Find layout net index of a named net (LAY)

Synopsis
int lay_findcontree(          // Returns status
      string;                 // Net name
      & index L_CNET;         // Returns net index
      );
Description
The lay_findcontree function searches the layout connection list net index with the specified net name. The function returns zero if the net has been found or nonzero otherwise.
See also
Functions lay_findconpart, lay_findconpartpin.

lay_getplanchkparam - Get layout DRC parameters (LAY)

Synopsis
void lay_getplanchkparam(
      & double;               // Returns distance trace - trace (STD2)
      & double;               // Returns distance trace - copper (STD2)
      & double;               // Returns distance copper - copper (STD2)
      & double;               // Trace default width (STD2)
      & string;               // Block name
      int [-6,99];            // Signal layer code (LAY1)
                              //  (layer!=(-1) only allowed for BAE HighEnd)
      int [0,0[;              // DRC block number
      );
Description
The lay_getplanchkparam function is used to retrieve minimum clearance parameter settings for the design rule check (DRC). The DRC parameter values are returned with the corresponding function parameters. BAE Professional, BAE Economy and BAE Light allow only for the query of global parameters for layer code -1 (All Layers) and DRC parameter block 0. BAE HighEnd also allows for querying DRC parameter blocks with layer-specific clearance distance values being assigned to any signal layer (layer codes 0 to 99), the top signal layer (layer code -5) and inside signal layers (layer code -5). The DRC block 0 is always defined and contains the global DRC parameters, and there is always a DRC parameter preference defined for layer code -1 (All Layers).
See also
Function lay_setplanchkparam.

lay_getpowplanetree - Get layout power plane tree number (LAY)

Synopsis
int lay_getpowplanetree(      // Returns net tree number or (-1)
      double;                 // X coordinate (STD2)
      double;                 // Y coordinate (STD2)
      int;                    // Power layer number (LAY1)
      double;                 // Drill diameter (STD2)
      );
Description
The lay_getpowplanetree function returns the net tree number of the signal connected via the specified power layer coordinate. lay_getpowplanetree checks the given power layer. The specified drill diameter is taken under consideration for distance calculations. This function can be utilized for designating power layer net connections when using split power planes. The function returns (-1) if no signal is connected at the given power layer coordinate or if an invalid power layer number was specified.
Warning
The coordinate values passed to lay_getpowplanetree are interpreted as absolute coordinates on the currently loaded element. This means that scan offsets must be considered on coordinate checks when calling lay_getpowplanetree indirectly via lay_scan* functions.

lay_getpowpolystat - Layout power layer polygon status query (LAY)

Synopsis
int lay_getpowpolystat(       // Returns status
      index L_FIGURE;         // Figure list element - power layer polygon
      & int;                  // Returns flag:
                              //    polgyon crosses/touches board outline
      & int;                  // Returns flag:
                              //    polygon crosses other power layer polygon(s)
      );
Description
The lay_getpowpolystat checks the status of the specified power layer polygon (split power plane). The return flags indicate whether the power layer polygon touches or crosses the board outline and/or any other power layer polygon. The function returns zero if the query was successful, (-1) for invalid parameters/environment or (-2) if the specified figure list element is not a power layer polygon.

lay_getrulecnt - Get rule count for specific object (LAY)

Synopsis
int lay_getrulecnt(           // Returns rule count or (-1) on error
      int;                    // Object class code
      int;                    // Object ident code (int or index type)
      );
Description
The lay_getrulecnt function is used for determining the number of rules attached to a specific object. The object can be the currently loaded element (object class code 0 with int value 0 passed for the object ident code), a figure list element of the currently loaded element (object class code 1 with valid L_FIGURE index type value passed for the object ident code), or a pool list element (object class code 2 with valid L_POOL index type value passed for the object ident code). The function returns a (non-negative) rule count or (-1) on error. The rule count determines the valid range for rule list indices to be passed to the lay_getrulename function for getting object-specific rule names. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_getrulecnt function.
See also
Functions lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_getrulename - Get rule name from specific layout object (LAY)

Synopsis
int lay_getrulename(          // Returns nonzero on error
      int;                    // Object class code
      int;                    // Object ident code (int or index type)
      int [0,[;               // Rule name list index
      & string;               // Rule name result
      );
Description
The lay_getrulename function is used to get the name of an index-specified rule assigned to the specified object. The object can be the currently loaded element (object class code 0 with int value 0 passed for the object ident code), a figure list element of the currently loaded element (object class code 1 with valid L_FIGURE index type value passed for the object ident code), or a pool list element (object class code 2 with valid L_POOL index type value passed for the object ident code). The rule name list index to be specified can be determined using the lay_getrulecnt function. The rule name is returned with the last function parameter. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_getrulename function.
See also
Functions lay_getrulecnt, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_getscclass - Get currently scanned layout class (LAY)

Synopsis
int lay_getscclass(           // Returns layout element class:
                              //    0 = Layout
                              //    1 = Part
                              //    2 = Padstack
                              //    3 = Pad
                              //    (-1) otherwise
      );
Description
The lay_getscclass function returns the currently scanned layout element class. lay_getscclass is intended for use in the callback functions of lay_scanall, lay_scanfelem or lay_scanpool only. The function returns (-1) if no scan function is active or if no layout element is currently scanned.
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_getscpartrpidx - Get currently scanned layout part (LAY)

Synopsis
index L_NREF lay_getscpartrpidx   // Returns layout part index or (-1)
      );
Description
The lay_getscpartrpidx function returns the named reference index of the currently scanned layout part. This allows for designating the layout part to which the currently scanned trace, polygon, text, pin, etc. belongs to. lay_getscpartrpidx is intended for use in the callback functions of lay_scanall, lay_scanfelem or lay_scanpool only. The function returns (-1) if no scan function is active or if no part is currently scanned.
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_getscrefpidx - Get currently scanned layout library element (LAY)

Synopsis
index L_POOL lay_getscrefpidx     // Returns pool index or (-1) if outside macro
      );
Description
The lay_getscrefpidx function returns the currently scanned macro reference pool index. This allows for designating the layout library element to which the currently scanned trace, polygon, text, etc. belongs to. lay_getscrefpidx is intended for use in the callback functions of lay_scanall, lay_scanfelem or lay_scanpool only. The function returns (-1) if no scan function is active or if no macro is currently scanned.
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_getscstkcnt - Get layout scan function stack depth (LAY)

Synopsis
int lay_getscstkcnt(          // Returns scan stack depth
      );
Description
The lay_getscstkcnt function returns the current layout scan function stack depth. I.e., lay_getscstkcnt can be used for control purposes in the callback functions of lay_scanall, lay_scanfelem or lay_scanpool.
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_getsctextdest - Get scanned layout text line destination (LAY)

Synopsis
int lay_getsctextdest(        // Returns status
      & double;               // Returns text line destination X coordinate (STD2)
      & double;               // Returns text line destination Y coordinate (STD2)
      );
Description
The lay_getsctextdest retrieves the text base line destination/end point coordinates of the currently scanned text. lay_getsctextdest is intended for use in the callback functions of lay_scanall, lay_scanfelem or lay_scanpool. The function returns 1 for successful queries or zero otherwise.
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_gettreeidx - Find layout net index of a tree (LAY)

Synopsis
int lay_gettreeidx(           // Returns status
      int;                    // Net tree number
      & index L_CNET;         // Returns net index
      );
Description
The lay_gettreeidx function searches the layout connection list net index with the specified net tree number. The function returns zero if the net has been found or nonzero otherwise.

lay_grpdisplay - Layout setup group display layer (LAY)

Synopsis
int lay_grpdisplay(           // Returns documentary layer number
      );
Description
The lay_grpdisplay function returns the group display documentary layer number defined in the BAE setup file.

lay_lastfigelem - Get last modified layout figure list element (LAY)

Synopsis
int lay_lastfigelem(          // Returns status
      & index L_FIGURE;       // Returns figure list index
      );
Description
The lay_lastfigelem function gets the last created and/or modified layout figure list element and returns the corresponding figure list index with the return parameter. The function returns zero if such an element exists or nonzero else.

lay_maccoords - Get layout (scanned) macro coordinates (LAY)

Synopsis
void lay_maccoords(
      & double;               // Macro X coordinate (STD2)
      & double;               // Macro Y coordinate (STD2)
      & double;               // Macro rotation angle (STD3)
      & int;                  // Macro mirror mode (STD14)
      & int;                  // Macro layer (LAY1 for Pad on Padstack)
      );
Description
The lay_maccoords function returns with its parameters the placement data of the currently scanned macro. This function is intended for use in the macro callback function of lay_scanall, lay_scanfelem or lay_scanpool only (otherwise zero/default values are returned).
See also
Functions lay_scanall, lay_scanfelem, lay_scanpool.

lay_macload - Load layout macro element to memory (STD)

Synopsis
int lay_macload(              // Returns status
      & index L_POOL;         // Macro pool element index
      string;                 // DDB file name
      string;                 // Element name
      int [100,[;             // Element DDB class (STD1)
      );
Description
The lay_macload function loads the specified layout library symbol to memory and returns the macro pool element index with the corresponding parameter. The function returns zero if the element was successfully loaded, (-1) on file access errors, (-2) on missing and/or invalid parameters or 1 if referenced macros (library elements) are missing. lay_macload is intended to be applied by features such as layout symbol browsers for examining library file contents. The lay_macrelease function can be used to unload and/or release macro elements from memory.
See also
Function lay_macrelease.

lay_macrelease - Unload/release layout macro element from memory (STD)

Synopsis
void lay_macrelease(          // Returns status
      index L_POOL;           // Macro pool element index
      );
Description
The lay_macrelease function unloads and/or releases the layout library symbol specified with the macro pool index parameter from memory. lay_macrelease is intended to be used together with the lay_macload function.
See also
Function lay_macload.

lay_menulaylinecnt - Get the layer menu lines count (LAY)

Synopsis
int lay_menulaylinecnt(       // Returns number of menu layer lines
      );
Description
The lay_menulaylinecnt function returns the number of menu lines currently defined with the layout signal layer menu. The layout signal layer menu can be customized using the bsetup utility program which allows for the definition of up to 12 signal layer entries with layer number and layer name.
See also
Functions lay_menulaylinelay, lay_menulaylinename.

lay_menulaylinelay - Get layer number of specified layer menu line (LAY)

Synopsis
int lay_menulaylinelay(       // Returns menu layer line layer number
      int [0,11];             // Menu line number
      );
Description
The lay_menulaylinelay function returns the layer number assigned to the specified menu line of the layout signal layer menu. The layout signal layer menu can be customized using the bsetup utility program which allows for the definition of up to 12 signal layer entries with layer number and layer name.
See also
Functions lay_menulaylinecnt, lay_menulaylinename.

lay_menulaylinename - Get name of specified layer menu line (LAY)

Synopsis
string lay_menulaylinename(   // Returns menu layer line name
      int [0,11];             // Menu line number
      );
Description
The lay_menulaylinename function returns the layer name assigned to the specified menu line of the layout signal layer menu. The layout signal layer menu can be customized using the bsetup utility program which allows for the definition of up to 12 signal layer entries with layer number and layer name.
See also
Functions lay_menulaylinecnt, lay_menulaylinelay.

lay_nrefsearch - Search named layout reference (LAY)

Synopsis
int lay_nrefsearch(           // Returns status
      string;                 // Reference name
      & index L_FIGURE;       // Returns figure list index
      );
Description
The lay_nrefsearch function searches for the specified named reference on the currently loaded layout element. The figure list index is set accordingly if the named reference is found. The function returns zero if the named reference has been found or nonzero otherwise.

lay_planmidlaycnt - Get layout inside layer count (LAY)

Synopsis
int lay_planmidlaycnt(        // Returns layout inside layer count
      );
Description
The lay_planmidlaycnt function returns the inside layer count of the currently loaded layout.
See also
Function lay_plantoplay.

lay_plantoplay - Get layout top layer (LAY)

Synopsis
int lay_plantoplay(           // Returns layout top layer (LAY1)
      );
Description
The lay_plantoplay function returns the top layer setting of the currently loaded layout element or signal layer 2 if no layout element is currently loaded.
See also
Function lay_planmidlaycnt.

lay_pltmarklay - Layout setup plot marker layer (LAY)

Synopsis
int lay_pltmarklay(           // Returns documentary layer number
      );
Description
The lay_pltmarklay function returns the plot marker documentary layer number defined in the BAE setup file.

lay_ruleerr - Layout rule system error status query (LAY)

Synopsis
void lay_ruleerr(
      & int;              // Error item code
      & string;           // Error item string
      );
Description
The lay_ruleerr function provides information on the current Rule System error state, and thus can be used to determine the error reason after an unsuccessful call to one of the Rule System management functions.
Diagnosis

The Rule System error state can be determined by evaluating the parameters returned with the lay_ruleerr function. The returned error item string identifies the error-causing element if needed. The possible error code values correspond with Rule System error conditions according to the following table:

Error CodeMeaning
0Rule System operation completed without errors
1Rule System out of memory
2Rule System internal error <e>
3Rule System function parameter invalid
128Rule System DB file create error
129Rule System DB file read/write error
130Rule System DB file wrong type
131Rule System DB file structure bad
132Rule System DB file not found
133Rule System DB file other error (internal error)
134Rule System rule <r> not found in rule database
135Rule System rule bad DB format (internal error <e>)
136Rule System object not found
137Rule System object double defined (internal error)
138Rule System incompatible variable <v> definition
139Rule System Rule <r> compiled with incompatible RULECOMP version

Depending on the error condition the error item string can describe a rule <r>, a variable <v> or an (internal) error status <e>. DB file errors refer to problems accessing the Rule System database file brules.vdb in the BAE programs directory. Internal errors usually refer to Rule System implementation gaps and should be reported to Bartels.

See also
Functions lay_getrulecnt, lay_getrulename, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_rulefigatt - Attach rule(s) to layout figure list element (LAY)

Synopsis
int lay_rulefigatt(           // Returns nonzero on error
      index L_FIGURE;         // Figure list element index
      void;                   // Rule name string or rule name list array
      );
Description
The lay_rulefigatt function is used to attach a new set of name-specified rules to the figure list element specified with the first function parameter. Either a single rule name (i.e., a value of type string) or a set of rule names (i.e., an array of type string) can be specified with the second function parameter. Note that any rules previously attached to the figure list element are detached before attaching the new rule set. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_rulefigatt function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_rulefigdet - Detach rules from layout figure list element (LAY)

Synopsis
int lay_rulefigdet(           // Returns nonzero on error
      index L_FIGURE;         // Figure list element index
      );
Description
The lay_rulefigdet function detaches all currently attached rules from the figure list element specified with the function parameter. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_rulefigdet function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt. lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_rulelaysatt - Attach rule(s) to layout layer stackup (LAY)

Synopsis
int lay_rulelaysatt(          // Returns nonzero on error
      int [0,111];            // Layer stackup index
      void;                   // Rule name string or rule name list array
      );
Description
The lay_rulelaysatt function is used to attach a new set of name-specified rules to the layer stackup specified by the layer stackup index. Either a single rule name (i.e., a value of type string) or a set of rule names (i.e., an array of type string) can be specified with the rule name function parameter. Note that any rules previously attached to the layer stackup will be detached before attaching the new rule set. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_rulelaysatt function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_rulelaysdet - Detach rules from layout layer stackup (LAY)

Synopsis
int lay_rulelaysdet(          // Returns nonzero on error
      int [0,111];            // Layer stackup index
      );
Description
The lay_rulelaysdet function detaches all attached rules from the layer stackup specified by the layer stackup index. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_rulelaysdet function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_ruleplanatt, lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_ruleplanatt - Attach rule(s) to currently loaded layout element (LAY)

Synopsis
int lay_ruleplanatt(          // Returns nonzero on error
      void;                   // Rule name string or rule name list array
      );
Description
The lay_ruleplanatt function is used to attach a new set of name-specified rules to the currently loaded element. Either a single rule name (i.e., a value of type string) or a set of rule names (i.e., an array of type string) can be specified with the function parameter. Note that any rules previously attached to the current element will be detached before attaching the new rule set. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_ruleplanatt function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet; lay_ruleplandet, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_ruleplandet - Detach rules from currently loaded layout element (LAY)

Synopsis
int lay_ruleplandet(          // Returns nonzero on error
      );
Description
The lay_ruleplandet function detaches all currently attached rules from the currently loaded element. The function returns zero on success or nonzero on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_ruleplandet function.
See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet; lay_ruleplanatt, lay_rulequery; Neural Rule System and Rule System Compiler.

lay_rulequery - Perform rule query on specific layout object (LAY)

Synopsis
int lay_rulequery(            // Returns hit count or (-1) on error
      int;                    // Object class code
      int;                    // Object ident code (int or index type)
      string;                 // Subject name
      string;                 // Predicate name
      string;                 // Query command string
      & void;                 // Query result
      []                      // Optional query parameters of requested type
      );
Description
The lay_rulequery function is used to perform a rule query on a specific object. The object can be the currently loaded element (object class code 0 with int value 0 passed for the object ident code), a figure list element of the currently loaded element (object class code 1 with valid L_FIGURE index type value passed for the object ident code), or a pool list element (object class code 2 with valid L_POOL index type value passed for the object ident code). The rule query function requires a rule subject, a rule predicate and a query command string to be specified with the corresponding function parameters. The query command string can contain one query operator and a series of value definition operators. The following query operators are implemented:

?dfor querying int values
?ffor querying double values
?sfor querying string values

The query operator can optionally be preceded with one of the following selection operators:

+for selecting the maximum of all matching values
-for selecting the minimum of all matching values

The + operator is used on default (e.g., when omitting the selection operator). The rule query resulting value is passed back to the caller with the query result parameter. This means that the query result parameter data type must comply with the query operator (int for ?d, double for ?f, string for ?s). The query command string can also contain a series of value definition operators such as:

%dfor specifying int values
%ffor specifying double values
%sfor specifying string values

Each value definition parameter is considered a placeholder for specific data to be passed with optional parameters. Note that these optional parameters must comply with the query command in terms of specified sequence and data types. The lay_rulequery function returns a (non-negative) hit count denoting the number of value set entries matched by the query. The function return value is (-1) on error. The lay_ruleerr function can be used to determine the error reason after an unsuccessful call of the lay_rulequery function.

Examples
With the rule
rule somerule
{
    subject subj
    {
        pred := ("A", 2);
        pred := ("A", 4);
        pred := ("B", 1);
        pred := ("C", 3);
        pred := ("B", 6);
        pred := ("D", 5);
        pred := ("D", 6);
        pred := ("A", 3);
    }
}

defined and attached to the currently loaded element, the lay_rulequery call

    hitcount = lay_rulequery(0,0,"subj","pred","%s ?d",intresult,"A") ;

sets the int variable hitcount to 3, and the int variable intresult to 4, whilst a call such as

    hitcount = lay_rulequery(0,0,"subj","pred","-?s %d",strresult,6) ;

sets hitcount to 2 and the string variable strresult to B.

See also
Functions lay_getrulecnt, lay_getrulename, lay_ruleerr, lay_rulefigatt, lay_rulefigdet, lay_rulelaysatt, lay_rulelaysdet, lay_ruleplanatt, lay_ruleplandet; Neural Rule System and Rule System Compiler.

lay_scanall - Scan all layout figure list elements (LAY)

Synopsis
int lay_scanall(              // Returns scan status
      double;                 // Scan X offset (STD2)
      double;                 // Scan Y offset (STD2)
      double;                 // Scan rotation angle (STD3)
      int [0,1];              // Element in workspace flag (STD10)
      int [0,1];              // Connectivity scan allowed flag:
                              //    0 = no scan allowed
                              //    1 = scan allowed
      * int;                  // Macro callback function
      * int;                  // Polygon callback function
      * int;                  // Path callback function
      * int;                  // Text callback function
      * int;                  // Drill callback function
      * int;                  // Layer check function
      * int;                  // Level check function
      );
Description
The lay_scanall function scans all figure list elements placed on the currently loaded layout element with all hierarchy levels. User-defined scan functions are automatically activated depending on the currently scanned element type. If a certain callback function should not be referenced, then the corresponding parameter must be set to the keyword NULL. The function returns nonzero on invalid parameter specifications or if one of the referenced user functions has returned a scan error status.
Macro callback function
int macrofuncname(
      index L_MACRO macro,    // Macro index
      index L_POOL pool,      // Pool element index
      int macinws,            // Macro in workspace flag (STD10)
      string refname,         // Macro Reference name
      index L_LEVEL level     // Macro signal level
      )
{
      // Macro callback function statements
      :
      return(contscan);
}

The lay_maccoords function can be used for determining the macro placement coordinates. The return value of the macro callback function must be 1 for continue scan, 0 for stop scan or (-1) on error.

Polygon callback function
int polyfuncname(
      index L_POLY poly,      // Polygon index
      int layer,              // Polygon layer (LAY1)
      int polyinws,           // Polygon in workspace flag (STD10)
      int tree,               // Polygon tree number or (-1)
      index L_LEVEL level     // Polygon signal level
      )
{
      // Polygon callback function statements
      :
      return(errstat);
}

The return value of the polygon callback function must be zero if scan ok or nonzero on error.

Path callback function
int pathfuncname(
      index L_LINE path,      // Path index
      int layer,              // Path layer (LAY1)
      int pathinws,           // Path in workspace flag (STD10)
      index L_LEVEL level     // Path signal level
      )
{
      // Path callback function statements
      :
      return(errstat);
}

The return value of the path callback function must be zero if scan ok or nonzero on error.

Text callback function
int textfuncname(
      index L_TEXT text,      // Text index
      double x,               // Text X coordinate (STD2)
      double y,               // Text Y coordinate (STD2)
      double angle,           // Text rotation angle (STD3)
      int mirr,               // Text mirror mode (STD14)
      int layer,              // Text layer (LAY1)
      double size,            // Text size (STD2)
      string textstr,         // Text string
      int textinws            // Text in workspace flag (STD10)
      )
{
      // Text callback function statements
      :
      return(errstat);
}

The return value of the text callback function must be zero if scan ok or nonzero on error.

Drill callback function
int drillfuncname(
      index L_DRILL drill,    // Drill index
      double x,               // Drill X coordinate (STD2)
      double y,               // Drill Y coordinate (STD2)
      int drillinws,          // Drill in workspace flag (STD10)
      int tree,               // Drill tree number or (-1)
      index L_LEVEL level     // Drill signal level
      )
{
      // Drill callback function statements
      :
      return(errstat);
}

The return value of the drill callback function must be zero if scan ok or nonzero on error.

Layer check function
int laycheckfuncname(
      int layer               // Scanned layer (LAY1)
      )
{
      // Layer check function statements
      :
      return(contscan);
}

The return value of the layer check function must be 1 for continue scan, 0 for stop scan or (-1) on error. The scan process can be accelerated considerably if restricted to the interesting layers with this function.

Level check function
int levcheckfuncname(
      index L_LEVEL level     // Scanned signal level
      )
{
      // Level check function statements
      :
      return(contscan);
}

The return value of the level check function must be 1 for continue scan, 0 for stop scan or (-1) on error. The scan process can be accelerated considerably if restricted to interesting signal levels with this function.

See also
Functions lay_maccoords, lay_scanfelem, lay_scanpool.

lay_scanfelem - Scan layout figure list element (LAY)

Synopsis
int lay_scanfelem(            // Returns scan status
      index L_FIGURE;         // Figure list element index
      double;                 // Scan X offset (STD2)
      double;                 // Scan Y offset (STD2)
      double;                 // Scan rotation angle (STD3)
      int [0,1];              // Element in workspace flag (STD10)
      int [0,1];              // Connectivity scan allowed flag:
                              //    0 = no scan allowed
                              //    1 = scan allowed
      * int;                  // Macro callback function
      * int;                  // Polygon callback function
      * int;                  // Path callback function
      * int;                  // Text callback function
      * int;                  // Drill callback function
      * int;                  // Layer check function
      * int;                  // Level check function
      );
Description
The lay_scanfelem function scans the specified layout figure list element with all hierarchy levels. User-defined callback functions for the currently scanned element type are automatically activated. If a certain callback function should not be referenced, then the corresponding parameter must be set to the keyword NULL. The return value of lay_scanfelem is nonzero on invalid parameter specifications or if one of the referenced user functions has returned a scan error status. See lay_scanall for the scan function definitions.
See also
Functions lay_maccoords, lay_scanall, lay_scanpool.

lay_scanpool - Scan layout pool element (LAY)

Synopsis
int lay_scanpool(             // Returns scan status
      void;                   // Pool element index
      double;                 // Scan X offset (STD2)
      double;                 // Scan Y offset (STD2)
      double;                 // Scan rotation angle (STD3)
      int [0,1];              // Element in workspace flag (STD10)
      int [0,1];              // Connectivity scan allowed flag:
                              //    0 = no scan allowed
                              //    1 = scan allowed
      * int;                  // Macro callback function
      * int;                  // Polygon callback function
      * int;                  // Path callback function
      * int;                  // Text callback function
      * int;                  // Drill callback function
      * int;                  // Layer check function
      * int;                  // Level check function
      );
Description
The lay_scanpool function scans the specified layout pool element with all hierarchy levels. User-defined callback functions for the currently scanned element type are automatically activated. If a certain callback function should not be referenced, then the corresponding parameter must be set to the keyword NULL. The return value of lay_scanpool is nonzero on invalid parameter specifications or if one of the referenced user functions has returned a scan error status. See lay_scanall for the callback function definitions.
See also
Functions lay_maccoords, lay_scanall, lay_scanfelem.

lay_setfigcache - Fill layout figure list access cache (LAY)

Synopsis
void lay_setfigcache(
      );
Description
The lay_setfigcache function fills the layout cache for fast figure list element access.

lay_setplanchkparam - Set layout DRC parameters (LAY)

Synopsis
int lay_setplanchkparam(      // Returns status
      double ]0.0,[;          // Distance trace - trace (STD2)
      double ]0.0,[;          // Distance trace - copper (STD2)
      double ]0.0,[;          // Distance copper - copper (STD2)
      double;                 // Trace default width (STD2)
      string;                 // Block name
      int [-6,99];            // Signal layer code (LAY1)
                              //  (layer!=(-1) only allowed for BAE HighEnd)
      int [0,0[;              // DRC block number
      );
Description
The lay_setplanchkparam function sets Layout Editor clearance distance values for the design rule check (DRC). The function returns nonzero if invalid distance parameters are specified. BAE Professional, BAE Economy and BAE Light allow only for the specification of global parameters for layer code -1 (All Layers) and DRC parameter block 0. BAE HighEnd also allows for specifying DRC parameter blocks with layer-specific clearance distance values to be assigned to any signal layer (layer codes 0 to 99), the top signal layer (layer code -5) and inside signal layers (layer code -5). The DRC block 0 is always defined and contains the global DRC parameters, and there is always a DRC parameter preference defined for layer code -1 (All Layers).
See also
Function lay_getplanchkparam.

lay_toplayname - Layout setup top layer name (LAY)

Synopsis
string lay_toplayname(        // Returns top layer name
      );
Description
The lay_toplayname function returns the top signal layer name defined in the BAE setup file.

lay_vecttext - Vectorize layout text (LAY)

Synopsis
int lay_vecttext(             // Returns status
      double;                 // Text X coordinate (STD2)
      double;                 // Text Y coordinate (STD2)
      double;                 // Text rotation angle (STD3)
      int [0,1];              // Text mirror mode (STD14)
      double ]0.0,[;          // Text size (STD2)
      int [0,1];              // Text physical flag:
                              //    0 = logical
                              //    1 = physical
      int [0,2];              // Layer mirror mode:
                              //    0 = mirror off
                              //    1 = mirror X
                              //    2 = mirror Y
      int [0,[;               // Text style (LAY14)
      string;                 // Text string
      * int;                  // Text vectorize function
      );
Description

The lay_vecttext function vectorizes the specified text using the currently loaded text font. The referenced text vectorize user function is automatically called for each text segment. The function returns nonzero if invalid parameters have been specified or if the referenced user function returns nonzero.

Text vectorize function
int vecfuncname(
      double x1,              // Start point X coordinate (STD2)
      double y1,              // Start point Y coordinate (STD2)
      double x2,              // End point X coordinate (STD2)
      double y2               // End point Y coordinate (STD2)
      )
{
      // Text vectorize function statements
      :
      return(errstat);
}

The return value of the text vectorize function must be zero if scan ok or nonzero on error.

 

C.4.2 Layout Editor Functions

The following User Language system functions are assigned to caller type GED; i.e., they can be called from the Layout Editor interpreter environment of the Bartels AutoEngineer:


ged_asklayer - GED layer selection (GED)

Synopsis
int ged_asklayer(             // Returns status
      & int;                  // Returns selected layer (LAY1|LAY9)
      int [0,7];              // Layer query type:
                              //    0 = Documentary layers and signal layers
                              //    1 = Signal layers
                              //    2 = Signal layers
                              //        (including Top Layer and All Layers)
                              //    3 = Documentary layers
                              //    4 = Signal and power layers
                              //    5 = arbitrary display element types
                              //    6 = Power layers
                              //    7 = Documentary, signal and power layers
      );
Description
The ged_asklayer function activates a Layout Editor layer selection menu. The layer query type designates the type of layers and/or display element types provided for selection. The function returns zero if a valid layer has been selected or (-1) if the layer selection was aborted.

ged_askrefname - GED reference name selection (GED)

Synopsis
int ged_askrefname(           // Returns status
      & string;               // Returns reference name
      & index L_CPART;        // Returns connection list part index
                              //    (on layout level only)
      int [0,2];              // Part selection mode:
                              //    0 = All parts
                              //    1 = Parts inside part group
                              //    2 = Parts outside part group
      int [0,1];              // Flag - unplaced part selection
      );
Description
The ged_askrefname function activates a dialog for selecting a reference, i.e., a part on layout level or a pin on part level. The part selection mode and the unplaced part flag can be used to restrict the list of selectable parts and/or pins. The functions returns zero if a reference was successfully selected or non-zero otherwise.

ged_asktreeidx - GED net selection (GED)

Synopsis
int ged_asktreeidx(           // Returns status
      & string;               // Returns tree name (on layout level only)
      & index L_CNET;         // Returns net index (on layout level only)
      int [0,5];              // Net selection mode:
                              //    0 = All trees, including No Net Assignment button
                              //    1 = Visible trees
                              //    2 = Invisible trees
                              //    3 = All trees
                              //    4 = Directly skip to net pick
                              //    5 = All trees, pattern input allowed
      );
Description
The ged_asktreeidx function activates a dialog for selecting a net. The net selection mode can be used to restrict the list of selectable nets. The functions returns zero if a net was successfully selected, 1 if a net delete operation (without net assignment) was performed, 2 if a net name pattern was specified, 3 if a net name was selected through net pick, or non-zero on invalid paramaters or if the selection was aborted.

ged_attachtextpos - Attach text position to layout element (GED)

Synopsis
int ged_attachtextpos(        // Returns status
      index L_FIGURE;         // Layout figure list element
      string;                 // Text string
      int;                    // Text layer (LAY1|LAY9)
      double;                 // Text X coordinate (STD2)
      double;                 // Text Y coordinate (STD2)
      double;                 // Text rotation angle (STD3)
      double;                 // Text size (STD2; negative for text base line)
      int [0,1];              // Text mirror mode (STD14)
      );
Description
The ged_attachtextpos function assigns a text position modifier with the specified properties for layer, position, rotation, size and mirroring to the text string of the specified layout figure list element. The function returns zero if the assignment was successful, (-1) for invalid parameters or (-2) if the layout element provides no text position modifier for the specified text string.
See also
Function ged_storetext.

ged_delelem - Delete GED figure list element (GED)

Synopsis
int ged_delelem(              // Returns status
      & index L_FIGURE;       // Element
      );
Description
The ged_delelem function deletes the given figure list element from the figure list. The function returns zero if the element was successfully deleted or nonzero on error.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
See also
Function ged_drawelem.

ged_drawelem - Redraw GED figure list element (GED)

Synopsis
void ged_drawelem(
      index L_FIGURE;         // Element
      int [0, 4];             // Drawing mode (STD19)
      );
Description
The ged_drawelem function updates the display of the given figure list element using the specified drawing mode.
See also
Function ged_delelem.

ged_drcerrorhide - Set/reset GED DRC error acceptance mode (GED)

Synopsis
int ged_drcerrorhide(         // Returns status
      string;                 // Error Id string
      int;                    // Error hide flag
      );
Description
The ged_drcerrorhide function sets the display mode for the DRC error specified by the error id. The function returns zero if the display mode was successfully set or non-zero on error.

ged_drcpath - GED trace test placement design rule check (GED)

Synopsis
int ged_drcpath(              // Returns status
      int [0,99];             // Path signal layer number (LAY1)
      double ]0.0,[;          // Path width (STD2)
      index L_LEVEL;          // Path connectivity level index
      int [0,3];              // Path connectivity checking mode:
                              //    0 = Show violations for all non-level elements
                              //    1 = Ignore violations against own tree
                              //    2 = Show violations against any tree
                              //    3 = Show violations against any tree beside pick element
      );
Description
The ged_drcpath function performs a design rule check for a trace placement with the given parameters without actually placing the trace. The trace polygon points are taken from the internal polygon point list previously stored with bae_storepoint. The function returns zero if the trace can be successfully placed without DRC errors, a value greater or equal (1) if the trace placement would cause a DRC error or (-1) on missing/invalid environment/parameters.
See also
Functions bae_storepoint, ged_storepath.

ged_drcpoly - GED polygon test placement design rule check (GED)

Synopsis
int ged_drcpoly(              // Returns status
      int;                    // Polygon layer (LAY1)
      int [1,9];              // Polygon type (LAY4)
      string;                 // Polygon net name (for LAY4 types 4, 6 and 9)
      index L_LEVEL;          // Polygon connectivity level index
      int [0,3];              // Polygon connectivity checking mode:
                              //    0 = Show violations for all non-level elements
                              //    1 = Ignore violations against own tree
                              //    2 = Show violations against any tree
                              //    3 = Show violations against any tree beside pick element
      );
Description
The ged_drcpoly function performs a design rule check for a polygon placement with the given parameters without actually placing the polygon. The polygon points are taken from the internal polygon point list previously stored with bae_storepoint. The function returns zero if the polygon can be successfully placed without DRC errors, a value greater or equal (1) if the polygon placement would cause a DRC error or (-1) on missing/invalid environment/parameters.
See also
Functions bae_storepoint, ged_storepoly.

ged_drcvia - GED via test placement design rule check (GED)

Synopsis
int ged_drcvia(               // Returns status
      string;                 // Via padstack library name
      double;                 // Via X coordinate (STD2)
      double;                 // Via Y coordinate (STD2)
      index L_LEVEL;          // Via connectivity level index
      int [0,3];              // Via connectivity checking mode:
                              //    0 = Show violations for all non-level elements
                              //    1 = Ignore violations against own tree
                              //    2 = Show violations against any tree
                              //    3 = Show violations against any tree beside pick element
      );
Description
The ged_drcvia function performs a design rule check for a via placement with the given parameters without actually placing the via. The function returns zero if the via can be successfully placed without DRC errors, a value greater or equal (1) if the via placement would cause a DRC error, (-1) on missing/invalid environment/parameters or (-2) if the requested via padstack is not available.
See also
Function ged_storeuref.

ged_elemangchg - Change GED figure list element rotation angle (GED)

Synopsis
int ged_elemangchg(           // Returns status
      & index L_FIGURE;       // Element
      double;                 // New rotation angle (STD3)
      );
Description
The ged_elemangchg function changes the rotation angle of the given figure list element. The rotation angle must be in radians. The function returns zero if the element has been successfully rotated, (-1) if the figure list element is invalid or (-2) if the figure list element cannot be rotated.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_elemfixchg - Change GED figure list element fixed flag (GED)

Synopsis
int ged_elemfixchg(           // Returns status
      & index L_FIGURE;       // Element
      int [0,1];              // New fixed flag (STD11)
      );
Description
The ged_elemfixchg function changes the fixed flag of the given figure list element. The fixed flag value 0 unfixes the element, the fixed flag value 1 fixes the element. The function returns zero if the element fixed flag has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element cannot be fixed.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_elemgrpchg - Change GED figure list element group flag (GED)

Synopsis
int ged_elemgrpchg(           // Returns status
      index L_FIGURE;         // Element
      int [0,6];              // New group selection status (STD13|0x4)
      );
Description
The ged_elemgrpchg function changes the group flag of the given figure list element. Setting bit 3 (0x4) of the group status parameter activates a status line message about the selected/deselected element and the total number of group-selected elements. The function returns zero if the element group flag has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element cannot be selected to a group.

ged_elemlaychg - Change GED figure list element layer (GED)

Synopsis
int ged_elemlaychg(           // Returns status
      & index L_FIGURE;       // Element
      int;                    // New layer (LAY1)
      );
Description
The ged_elemlaychg function changes the layer of the given figure list element. The layer can be set for polygons, traces, texts, pads (on padstack level), and drill holes. For drill holes the layer input parameter specifies the drill class code. The function returns zero if the element layer has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element layer cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_elemmirrchg - Change GED figure list element mirror mode (GED)

Synopsis
int ged_elemmirrchg(          // Returns status
      & index L_FIGURE;       // Element
      int [0,18];             // New mirror mode (STD14|LAY3)
      );
Description
The ged_elemmirrchg function changes the mirror mode of the given figure list element. The mirror mode can be set for polygons, texts and references. The function returns zero if the element mirror mode has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element mirror mode cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_elemposchg - Change GED figure list element position (GED)

Synopsis
int ged_elemposchg(           // Returns status
      & index L_FIGURE;       // Element
      double;                 // New X coordinate (STD2)
      double;                 // New Y coordinate (STD2)
      );
Description
The ged_elemposchg function changes the position of the given figure list element. Polygons and/or traces are replaced to set the first point of the polygon/trace to the specified position. The function returns zero if the element has been successfully repositioned, (-1) if the figure list element is invalid or (-2) if the figure list element position cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_elemsizechg - Change GED figure list element size (GED)

Synopsis
int ged_elemsizechg(          // Returns status
      & index L_FIGURE;       // Element
      double;                 // New size (STD2)
      );
Description
The ged_elemsizechg function changes the size of the given figure list element. The size can be changed for texts, drill holes, traces and areas. For traces, a trace width change is performed. For areas, the size parameter is interpreted as area expansion distance. The function returns zero if the element size has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element size cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_getautocornins - Get GED auto corner insert mode (GED)

Synopsis
int ged_getautocornins(       // Returns mode:
                              //    0 = Auto Corner Insert disabled
                              //    1 = Auto Corner Insert Traces
                              //    2 = Auto Corner Insert Areas
                              //    3 = Auto Corner Insert Traces & Areas
      );
Description
The ged_getautocornins function returns the Layout Editor input mode for automatically inserting corners when generating traces and/or polygons. The auto corner insert mode is selected with either option Grid+Rotation octagonal or option Rotation octagonal from the Grids+Rotation function.

ged_getdblpar - Get GED double parameter (GED)

Synopsis
int ged_getdblpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Last group placement x coordinate (STD2)
                              //    1 = Last group placement y coordinate (STD2)
                              //    2 = Default part placement angle (STD3)
                              //    3 = Copper fill isolation distance (STD2)
                              //    4 = Copper fill min. area size (STD2)
                              //    5 = Copper fill heat trap width (STD2)
                              //    6 = Copper fill heat trap isolation (STD2)
                              //    7 = Hatch line spacing (STD2)
                              //    8 = Hatch line width (STD2)
                              //    9 = Hatch line angle (STD3)
                              //    10 = Net visibility dialog net name list control element width
                              //    11 = Default text size (STD2)
                              //    12 = DRC distance violation text size (STD2)
                              //    13 = Autoplacement Part Expansion (STD2)
                              //    14 = Autoplacement Part Pin Factor [0, 1.0]
                              //    15 = Autoplacement Segment Fit [0, 1.0]
                              //    16 = Autoplacement Part Outline Offset (STD2)
                              //    17 = Default text placement angle (STD3)
                              //    18 = Autorouter Border to copper LE distance (STD2)
                              //    19 = Autorouter Heat trap to drill LE distance (STD2)
                              //    20 = Autorouter Isolation to drill LE distance (STD2)
                              //    21 = Autorouter Power plane connection LE run length (STD2)
                              //    22 = Autorouter Requested special routing grid (STD2)
                              //    23 = Autorouter Split power plane guard range (STD2)
                              //    24 = Autorouter BGA grid tolerance distance (STD2)
                              //    25 = Autorouter SMD power plane connection LE run length (STD2)
                              //    26 = Autorouter Pin to via distance (STD2)
                              //    27 = CAM Gerber standard line width (STD2)
                              //    28 = CAM Minimum distance heat trap to drilling (STD2)
                              //    29 = CAM Minimum distance isolation to drilling (STD2)
                              //    30 = CAM Heat trap to drilling distance tolerance (STD2)
                              //    31 = CAM Isolation to drilling distance tolerance (STD2)
                              //    32 = CAM Power layer border width (STD2)
                              //    33 = CAM Split power plane isolation width (STD2)
                              //    34 = Bus trace width (STD2)
                              //    35 = Bus trace spacing (STD2)
      & double;               // Returns parameter value
      );
Description
The ged_getdblpar function is used to query Layout Editor double parameters previously set with ged_setdblpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ged_getintpar, ged_getstrpar, ged_setdblpar, ged_setintpar, ged_setstrpar.

ged_getdrcmarkmode - Get GED DRC Error Display Mode (GED)

Synopsis
int ged_getdrcmarkmode(       // DRC error display mode
      );
Description
The ged_getdrcmarkmode function returns the currently selected Layout Editor DRC error display mode. The function returns zero for error color error marker display and 1 for highlight error marker display.
See also
Function ged_setdrcmarkmode.

ged_getdrcstatus - Get GED DRC Completion Status (GED)

Synopsis
int ged_getdrcstatus(         // DRC completion status
      );
Description
The ged_getdrcstatus function return the current Layout Editor design rule check completion status. The function returns zero if only the design changes of the current program session are checked, or nonzero if a full design rule check for complete DRC error display has been applied to the currently loaded element.

ged_getgroupdata - GED group placement data query (GED)

Synopsis
int ged_getgroupdata(         // Status
      & double;               // Group base X coordinate (STD2)
      & double;               // Group base Y coordinate (STD2)
      & double;               // Group rotation angle (STD3)
      & double;               // Group scale factor
      & int;                  // Group mirror mode
      & double;               // Group quadrant X coordinate (STD2)
      & double;               // Group quadrant Y coordinate (STD2)
      & int;                  // Group quadrant mode
      & int;                  // Group area mode
      );
Description
ged_getgroupdata function can be used to retrieve the current Layout Editor group placement interaction input data. The function returns nonzero if no group placement interaction is activated.
See also
Function ged_getinputdata.

ged_gethighlnet - Get GED net highlight mode/color (GED)

Synopsis
int ged_gethighlnet(          // Returns status
      int [-1,[;              // Net tree number or -1 for highlight focus modus query
      & int;                  // Highlight mode
      & int;                  // Highlight color (bit 1 to 6, STD18) and pattern (bit 7 to 12)
      );
Description
The ged_gethighlnet function can be used to get the highlight mode and the highlight color and pattern for the specified net. The highlight mode parameter is set to nonzero if the net highlight is activated or zero if the net highlight is deactivated. The second parameter returns the highlight color (bit 1 to 6) and the highlight pattern (bit 7 to 12). The function returns nonzero if the query was successful or zero on error (net not found, invalid parameters).
See also
Function ged_highlnet.

ged_getinputdata - GED input data query (GED)

Synopsis
int ged_getinputdata(         // Status
      & double;               // Initial X coordinate (STD2)
      & double;               // Initial Y coordinate (STD2)
      & double;               // Initial width (STD2)
      & int;                  // Initial layer (LAY1)
      & double;               // Current X coordinate (STD2)
      & double;               // Current Y coordinate (STD2)
      & double;               // Current width (STD2)
      & int;                  // Current layer (LAY1)
      & void;                 // Input mode/element (LAY11)
      & void;                 // Input path level index (optional)
      & double;               // Input first segment start X coordinate (STD2) */
      & double;               // Input first segment start Y coordinate (STD2) */
      & double;               // Input first arc center X coordinate (STD2) */
      & double;               // Input first arc center Y coordinate (STD2) */
      & int;                  // Input first arc center type (STD15) */
      & double;               // Input last segment start X coordinate (STD2) */
      & double;               // Input last segment start Y coordinate (STD2) */
      & double;               // Input last arc center X coordinate (STD2) */
      & double;               // Input last arc center Y coordinate (STD2) */
      & int;                  // Input last arc center type (STD15) */
      );
Description
The ged_getinputdata function can be used to retrieve the current Layout Editor placement interaction input data. The placement data has to be interpreted according to the input interaction type and/or placement element function parameter. The function returns nonzero if no placement interaction is activated.
See also
Function ged_getgroupdata.

ged_getintpar - Get GED integer parameter (GED)

Synopsis
int ged_getintpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Pick point display mode:
                              //        0 = No pick point display
                              //        1 = Pick point display
                              //        2 = Pick point wide display
                              //        3 = Pick point edit display
                              //    1 = Automatic DRC on layout load mode:
                              //        0 = no automatic DRC
                              //        1 = automatic DRC with verification
                              //        2 = automatic DRC without verification
                              //    2 = Top layer color code
                              //    3 = Info display flag:
                              //        0 = No automatic info display
                              //        1 = Automatic info display
                              //    4 = Info display mode:
                              //        0 = No info display
                              //        1 = Complete info display
                              //        2 = Copper info only display
                              //    5 = Angle edit direction
                              //    6 = Part level element DRC mode:
                              //        0 = Complete DRC
                              //        1 = Consider part macros checked
                              //    7 = Grid corner scan mode:
                              //        0 = No grid corner scan
                              //        1 = Complete grid corner scan
                              //        2 = Current window corner scan
                              //        3 = Dynamic window corner scan
                              //    8 = Mincon update mode
                              //    9 = DRC polygon sub-type exclude bits
                              //    10 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: Supress copper fill problem polygon group selection wanrnings
                              //        Bit 2: Supress variant mismatch warnings
                              //        Bit 3: Supress autorouter mode termination warnings
                              //    11 = Layer usage scan mode
                              //    12 = Area polygon edit mode:
                              //        0 = don't close polylines
                              //        1 = always close polylines
                              //        2 = polyline close prompt
                              //    13 = DRC distance display pattern
                              //    14 = Trace edit pick mode:
                              //        0 = snap to input grid
                              //        1 = pin/trace snap at first trace corner
                              //    15 = Area mirror visibility mode:
                              //        0 = Normal area mirror visibility
                              //        1 = Disable area mirror visibility
                              //    16 = Trace net deletion query limit
                              //    17 = Plot preview mode:
                              //        0 = none
                              //        1 = plotter pen width
                              //    18 = DRC distance display mode:
                              //        0 = none
                              //        1 = trace distance line
                              //        2 = area distance line
                              //        3 = trace distance pattern
                              //        4 = area distance pattern
                              //    19 = Text layer mirroring mode:
                              //        0 = no layer mirroring
                              //        1 = documentary layer mirroring
                              //        2 = signal and documentary layer mirroring
                              //    20 = Default part mirroring mode
                              //    21 = Autosave interval
                              //    22 = Part airline display mode:
                              //        0 = No airlines
                              //        1 = Static airlines
                              //        2 = Dynamic airlines
                              //    23 = Angle lock toggle mode:
                              //        0 = Pick side default
                              //        1 = Grid toggle
                              //        2 = Shorter side toggle
                              //        3 = Edit direction
                              //    24 = Copper fill heat trap mode:
                              //        0 = Direct Connect
                              //        1 = Pin & Via Heat Traps
                              //        2 = Pin Heat Traps
                              //        3 = Via Heat Traps
                              //        |4 = No Neighbour Pins Flag
                              //        |8 = Heat Trap Trace Flag
                              //        |16 = Only Unconnected Layers
                              //    25 = Copper fill trace mode:
                              //        0 = Round Corners
                              //        1 = Octagonal Corners
                              //        2 = Octagonal Circles
                              //        3 = Octagonal Corners & Circles
                              //    26 = Copper fill island mode:
                              //        0 = Keep Islands
                              //        1 = Delete Islands
                              //        2 = Select Islands
                              //    27 = Copper fill inside area mode:
                              //        0 = Inner Fill Area Fill
                              //        1 = Inner Fill Area Keepout
                              //        |2 = Keepout Areas without Distance
                              //    28 = Copper fill max. heat trap junctions
                              //    29 = Copper fill acute angle mode:
                              //        0 = Acute Angles flat
                              //        1 = Acute Angles round
                              //    30 = Copper fill hatch mode:
                              //        0 = Line Hatching
                              //        1 = Grid Hatching
                              //        |2 = Create Editable Paths
                              //    31 = Net visibility dialog box mode:
                              //        0 = Single column net name list display
                              //        1 = Multi-column net name list display
                              //    32 = Group move display mode:
                              //        0 = Moving Picture Off
                              //        1 = Display Group Layer Only
                              //        2 = Moving Picture On
                              //        3 = Moving Picture All
                              //    33 = Group trace selection mode:
                              //        0 = Select Traces & Vias
                              //        1 = Select Traces Only
                              //        2 = Select Vias Only
                              //    34 = Pick preference layer selection (LAY1)
                              //    35 = Clipboard text placement request flag
                              //    36 = Edit direction
                              //    37 = Mincon Area Mode (Bit Patterns):
                              //        0 = No Area Mincon
                              //        |1 = Copper Area Mincon
                              //        |2 = Connected Copper Area Mincon
                              //    38 = Group angle lock mode:
                              //        0 = Keep group angle lock
                              //        1 = Automatically release group angle lock
                              //    39 = Autoplacement Optimizer Passes
                              //    40 = Autoplacement Part Swap On/Off Flag
                              //    41 = Autoplacement Pin/Gate Swap On/Off Flag
                              //    42 = Autoplacement Mirroring Mode:
                              //        0 = No SMD mirroring
                              //        1 = SMD Mirroring
                              //        2 = SMD 2-Pin Mirroring
                              //        3 = Only SMD Mirroring
                              //    43 = Autoplacement Rotation Mode:
                              //        0 = 0-90 Degree Rotation
                              //        1 = 0-270 Degree Rotation
                              //        2 = 0 Degree Rotation
                              //        3 = 90 Degree Rotation
                              //        4 = 0 XOR 90 Degree Rotation
                              //    44 = Autoplacement Retry Passes
                              //    45 = Autoplacement SMD Rotation Mode:
                              //        0 = 0-90 Degree Rotation
                              //        1 = 0-270 Degree Rotation
                              //        2 = 0 Degree Rotation
                              //        3 = 90 Degree Rotation
                              //        4 = 0 XOR 90 Degree Rotation
                              //    46 = Autoplacement Part Outline Layer (LAY1)
                              //    47 = Group visibility mode:
                              //        0 = Select all elements
                              //        1 = Select visible elements only
                              //    48 = Default text mirror mode and text mode (STD14|LAY14)
                              //    49 = Autorouter Number of optimization runs
                              //    50 = Autorouter Optimizer characteristic
                              //    51 = Autorouter Max. number of vias per connection
                              //    52 = Autorouter Router via delay at 1/10"
                              //    53 = Autorouter Router pin channel delay
                              //    54 = Autorouter Cross direction delay
                              //    55 = Autorouter Direction change delay
                              //    56 = Autorouter Path packing delay
                              //    57 = Autorouter Statistical delay base
                              //    58 = Autorouter Max. rip-ups per con.
                              //    59 = Autorouter Max. rip-up level
                              //    60 = Autorouter Max. number of rip-up retries
                              //    61 = Autorouter Router via grid index
                              //    62 = Autorouter Bus structure delay
                              //    63 = Autorouter Re-route area 1 delay
                              //    64 = Autorouter Re-route area 2 delay
                              //    65 = Autorouter Skip existing path delay
                              //    66 = Autorouter Router cleaning run enable
                              //    67 = Autorouter Optim. cleaning run enable
                              //    68 = Autorouter Power connection vector unroutes
                              //    69 = Autorouter Automatic save enable
                              //    70 = Autorouter Corner connection output enable
                              //    71 = Autorouter Unroute output sort mode
                              //    72 = Autorouter Corner mitring mode
                              //    73 = Autorouter Existing traces orientation mode
                              //    74 = Autorouter Standard connection layer delay
                              //    75 = Autorouter Bus connection layer delay
                              //    76 = Autorouter Wave limitation offset
                              //    77 = Autorouter Gridless via check mode
                              //    78 = Autorouter Input error checking mode
                              //    79 = Autorouter Trace to pin entry mode
                              //    80 = Autorouter Requested subgrid factor
                              //    81 = Autorouter Router off-grid delay
                              //    82 = Autorouter Bus recognition and routing mode
                              //    83 = Autorouter SMD pin-via pass enable
                              //    84 = Autorouter Pin/gate swap mode
                              //    85 = Autorouter Requested gridless routing mode
                              //    86 = Autorouter Incremental output mode
                              //    87 = Autorouter Router prefered grid shift
                              //    88 = Autorouter Router prefered grid delay
                              //    89 = Autorouter Outside net area delay
                              //    90 = Autorouter Last optimization par. change mode
                              //    91 = Autorouter Auto rip-up parameter mode
                              //    92 = Autorouter Prefered routing direction mode
                              //    93 = Autorouter Optimizer order mode
                              //    94 = Autorouter Via rip-up flag
                              //    95 = Autorouter Routing window border size
                              //    96 = Autorouter BGA fan out enable flag
                              //    97 = Autorouter Fan out gridded check mode
                              //    98 = Autorouter Alternate via shift mode
                              //    99 = Autorouter Full via evaluation mode
                              //    100 = Autorouter Micro via mode
                              //    101 = Autorouter Forced dir. max. derivation
                              //    102 = Autorouter Routing frame window flag
                              //    103 = Autorouter Requested pad entry subgrid
                              //    104 = Autorouter Power layer via mode
                              //    105 = Autorouter Via check mode
                              //    106 = Autorouter Large net connection count
                              //    107 = Autorouter Autorouting active flag
                              //    108 = CAM Heat trap base angle
                              //    109 = Single corner edit flag
                              //    110 = Resize with round corners flag
                              //    111 = Hidden DRC errors display flag
                              //    112 = DRC violation elements scan flag
                              //    113 = Part placement trace move mode
                              //        0 = No trace move
                              //        1 = Trace end move
                              //        2 = Trace segment move
                              //    114 = Polygon edit autocomplete flag
                              //    115 = Board Outline alternative documentary layer (LAY1)
                              //    116 = Trace join query mode:
                              //        0 = Never join traces
                              //        1 = Always join traces
                              //        2 = Query for trace join
                              //    117 = Trace display class bits (LAY15)
                              //    118 = Text display class bits (LAY15)
                              //    119 = Copper polygon display class bits (LAY15)
                              //    120 = Forbidden area polygon display class bits (LAY15)
                              //    121 = Border polygon display class bits (LAY15)
                              //    122 = Connected copper polygon display class bits (LAY15)
                              //    123 = Documentary line display class bits (LAY15)
                              //    124 = Documentary area display class bits (LAY15)
                              //    125 = Copper fill with cutout polygon display class bits (LAY15)
                              //    126 = Hatched copper polygon display class bits (LAY15)
                              //    127 = Split power plane polygon display class bits (LAY15)
                              //    128 = Flag - Color table saved
                              //    129 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    130 = Airline clipping mode:
                              //        0 = No unroutes clipping
                              //        1 = Clip unroutes without workspace target
                              //    131 = Trace collision mode:
                              //        -1 = Query for operation
                              //        0 = Ignore collisions
                              //        1 = Delete colliding traces
                              //        2 = Delete colliding segments
                              //        3 = Cut colliding segments
                              //    132 = Layout trace merge query mode:
                              //        0 = Never merge layout traces
                              //        1 = Always merge layout traces
                              //        2 = Query merge mode
                              //    133 = Part trace merge query mode:
                              //        0 = Never merge part traces
                              //        1 = Always merge part traces
                              //        2 = Query merge mode
                              //    135 = Element move polygon display mode:
                              //        0 = Display outline
                              //        1 = Display filled
                              //    136 = Group move airline display mode:
                              //        0 = Airline Display Off
                              //        1 = Display Group Part Pin Airlines
                              //    137 = Trace collision distance check mode:
                              //        0 = Use DRC distance for collision check
                              //        1 = Consider only crossings as collision
                              //    138 = Trace segment bundle pick mode:
                              //        0 = Continuous segment pick
                              //        1 = Pick first and last bundle segment
                              //    139 = Trace segment insert pick mode:
                              //        0 = 3 click selection
                              //        1 = 2 click selection
                              //    140 = Part edit DRC:
                              //        0 = no part edit online DRC
                              //        1 = part edit online DRC
                              //    141 = Drill tool table optimization flag
                              //    142 = Bus trace count
                              //    143 = Edit bus trace count
                              //    144 = Bus trace creation mode:
                              //        0 = Create trace bundle
                              //        1 = Create seperate traces
                              //    145 = Bus trace corner mode:
                              //        0 = Create angle corners
                              //        1 = Create arc corners
                              //    146 = Silk screen layer (LAY1)
                              //    147 = Macro outline display mode:
                              //        0 = No macro outline display
                              //        1 = Display macro outline at moved references
                              //        2 = Display macro outlines
      & int;                  // Returns parameter value
      );
Description
The ged_getintpar function is used to query Layout Editor integer parameters previously set with ged_setintpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ged_getdblpar, ged_setintpar, ged_getstrpar, ged_setdblpar. ged_setstrpar.

ged_getlaydefmode - Get GED default layer mode (GED)

Synopsis
int ged_getlaydefmode(        // Default layer mode:
                              //    0 = automatic layer default disabled
                              //    1 = used edit layer as layer default
                              //    2 = last used layer as layer default
      );
Description
The ged_getlaydefmode function returns the current Layout Editor default layer mode.
See also
Functions ged_getlayerdefault, ged_setlaydefmode, ged_setlayerdefault.

ged_getlayerdefault - Get GED default layer (GED)

Synopsis
int ged_getlayerdefault(      // Layer (LAY1)
      );
Description
The ged_getlayerdefault function returns the current Layout Editor default layer.
See also
Functions ged_getlaydefmode, ged_setlaydefmode, ged_setlayerdefault.

ged_getmincon - Get GED Mincon function type (GED)

Synopsis
int ged_getmincon(            // Returns Mincon function type (LAY10)
      );
Description
The ged_getmincon function returns the currently selected Layout Editor Mincon function type, i.e., the airline display mode (LAY10).

ged_getpathwidth - Get GED path standard widths (GED)

Synopsis
void ged_getpathwidth(
      & double;               // Returns small standard width (STD2)
      & double;               // Returns wide standard width (STD2)
      );
Description
The ged_getpathwidth function parameters return the Layout Editor standard widths for small and wide traces.

ged_getpickmode - Get GED element pick mode (GED)

Synopsis
int ged_getpickmode(          // Element pick mode:
                              //    0 = Pick preference layer pick
                              //    1 = Pick with element selection
                              //    2 = Exclusive pick preference layer pick
      );
Description
ged_getpickmode function returns the currently selected Layout Editor element pick mode.
See also
Funktion ged_setpickmode.

ged_getpickpreflay - Get GED pick preference layer (GED)

Synopsis
int ged_getpickpreflay(       // Returns pick preference layer (LAY1)
      );
Description
The ged_getpickpreflay function returns the currently active Layout Editor pick preference layer for element selection (LAY1).

ged_getpowlayerrcnt - Get GED power layer error count (GED)

Synopsis
int ged_getpowlayerrcnt(      // Powe layer error count
      );
Description
The ged_getpowlayerrcnt function returns the current Layout Editor power layer error count.

ged_getsegmovmode - Get GED trace segment move mode (GED)

Synopsis
int ged_getsegmovmode(        // Returns trace segment move mode:
                              //    0 = Move without neighbours
                              //    1 = Move with neighbours
                              //    2 = Adjust neighbours
                              //    3 = Adjust neighbours without vias
                              //    8 = Adjust next neighbours only
                              //    |4 = Open trace ends follow segment movement
      );
Description
The ged_getsegmovmode function returns the current Layout Editor trace segment move mode.
See also
Function ged_setsegmovmode.

ged_getstrpar - Get GED string parameter (GED)

Synopsis
int ged_getstrpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Last placed named reference name
                              //    1 = Last placed named reference macro name
                              //    2 = Last placed text string
                              //    3 = Default library name
                              //    4 = Next free name
                              //    5 = Drill naming base
                              //    6 = Drill part macro name pattern
                              //    7 = Drill padstack macro name pattern
                              //    8 = Input prompt override string
                              //    9 = Last placed macro library
                              //    10 = Autosave path name
      & string;               // Returns parameter value
      );
Description
The ged_getstrpar function is used to query Layout Editor string parameter settings. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ged_getdblpar, ged_getintpar, ged_setdblpar, ged_setintpar, ged_setstrpar.

ged_getviaoptmode - Get GED trace via optimization mode (GED)

Synopsis
int ged_getviaoptmode(        // Returns trace via optimization mode:
                              //    0 = Via optimization
                              //    1 = Keep vias
      );
Description
The ged_getviaoptmode function returns the current Layout Editor trace via optimization mode.
See also
Function ged_setviaoptmode.

ged_getwidedraw - Get GED wide line display start width (GED)

Synopsis
double ged_getwidedraw(       // Returns width value (STD2)
      );
Description
The ged_getwidedraw function returns the current Layout Editor wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons.

ged_groupselect - GED group selection (GED)

Synopsis
int ged_groupselect(          // Number of changes or (-1) on error
      int [0,9];              // Element selection type:
                              //    0 = select by element type
                              //    1 = select by element layer
                              //    2 = select by element fixed flag
                              //    3 = select by element visibility
                              //    4 = select by element not on layer
                              //    5 = select by element tree/net number
                              //    6 = select by element negated tree/net number
                              //    7 = select elements connected to tree number
                              //    8 = select elements not connected to tree
                              //    9 = select by element polygon type
                              //    10 = select by element glued mode
      int;                    // Element selection value according to type:
                              //    0 - element type (0|LAY6)
                              //    1,4 - element layer (LAY1)
                              //    2 - element fixed flag (STD11)
                              //    3 - element visible flag (0|1)
                              //    5,6 - element tree/net number
                              //    7, 8 - tree/net number
                              //    9 - element polygon type (LAY4)
                              //    10 - element glued mode (STD11 | STD12)
      int [0,2];              // New group selection status (STD13)
      );
Description
The ged_groupselect function changes the group flag of all elements of the specified type and/or value. The function returns the number of elements (de)selected or (-1) on error (i.e., on invalid and/or incompatible parameter specifications). Element selection value zero for element type selection is used for selecting elements of any type.
Warning
Internal layout element types such as the standard via definition(s) are excluded from group (de)selections with ged_groupselect to prevent from unintentionally modifying and/or deleting such elements and/or definitions when subsequently using other group functions.

ged_highlnet - Set GED net highlight mode/color (GED)

Synopsis
int ged_highlnet(             // Returns status
      int [-1,[;              // Net tree number
      int [0,[;               // Highlight off/on flag || (color/patterndef << 1)
      );
Description
The ged_highlnet function sets the highlight mode of the net specified by the given net tree number. The least significant bit of the highlight parameter designates whether the net should be highlighted (value 1) or not (value 0). The other bits the highlight parameter can be used to specify a highlight color code (bit 2 to 6) and/or a highlight display pattern (bit 7 to 12). The function returns nonzero if an invalid net tree number and/or highlight mode value has been specified.
See also
Function ged_gethighlnet.

ged_layergrpchg - Select GED group by layer (GED)

Synopsis
int ged_layergrpchg(          // Number of elements
      int [0,[;               // Layer number (LAY1)
      int [0,1];              // New group selection status (STD13)
      );
Description
The ged_layergrpchg function changes the group flag of all elements placed on the specified layer. The function returns the number of elements (de)selected or (-1) on error.

ged_partaltmacro - Change GED net list part package type (GED)

Synopsis
int ged_partaltmacro(         // Returns status
      string;                 // Part name
      string;                 // New part package type name
      );
Description
The ged_partaltmacro function changes the package type of the given net list part. The function returns nonzero if the part package type has been successfully changed, (-1) for invalid input parameters, (-2) if the specified package does not contain all pins referenced by the part in the net list (package is changed anyway), (-3) if the specified part does not exist in the net list, (-4) if the new package type isn't allowed for this part, (-5) if the new package couldn't be loaded, (-6) if the new package couldn't be copied to the job file or (-7) for multiple package change requests (e.g., a to b and then b to c) in one program run.
Warning
It is strongly recommended not to use this function in L_CPART index loops since the current L_CPART index variables are invalid after calling ged_partaltmacro.

ged_partnamechg - Change GED part name (GED)

Synopsis
int ged_partnamechg(          // Returns status
      string;                 // Old name
      string;                 // New name
      );
Description
The ged_partnamechg function changes the name of part. The function returns nonzero if the part name has been successfully changed, (-1) for invalid input parameters, (-2) if the specified part is not yet placed, (-4) if the new name exists already or (-5) for multiple name change requests (e.g., a to b and then b to c) in one program run. On layout part macro level, ged_partnamechg can be used for the renaming of pins.
Warning
This function might change the net list in which case a Backannotation is subsequently required. It is strongly recommended not to use this function in L_CPART index loops since the current L_CPART index variables are invalid after calling ged_partnamechg.

ged_pickanyelem - Pick any GED figure list element (GED)

Synopsis
int ged_pickanyelem(          // Returns status
      & index L_FIGURE;       // Returns picked element
      int;                    // Pick element type set ((LAY6 except 7)<<1 or'ed)
      );
Description
The ged_pickanyelem function activates a mouse interaction for selecting a figure list element from the specified pick element type set. The picked figure list element index is returned with the first parameter. The function returns zero if an element has been picked or (-1) if no element was found at the pick position.
See also
Function ged_pickelem.

ged_pickelem - Pick GED figure list element (GED)

Synopsis
int ged_pickelem(             // Returns status
      & index L_FIGURE;       // Returns picked element
      int [1,10];             // Pick element type (LAY6 except 7)
      );
Description
The ged_pickelem function activates an interactive figure list element pick request (with mouse). The required pick element type is specified with the second parameter. The picked figure list element index is returned with the first parameter. The function returns zero if an element has been picked or (-1) if no element of the required type has been found at the pick position.
See also
Functions ged_pickanyelem, ged_setpickelem.

ged_setautocornrins - Set GED auto corner insert mode (GED)

Synopsis
int ged_setautocornins(       // Returns status
      int [0,3];              // Auto corner insert mode:
                              //    0 = Auto Corner Insert disabled
                              //    1 = Auto Corner Insert Traces
                              //    2 = Auto Corner Insert Areas
                              //    3 = Auto Corner Insert Traces & Areas
      );
Description
The ged_setautocornins function sets the Layout Editor input mode for automatically inserting corners when generating traces and/or polygons. Usually, the auto corner insert mode is selected with either option Grid+Rotation octagonal or option Rotation octagonal from the Grids+Rotation function. The function returs nonzero if an invalid octagon input mode has been specified.

ged_setdblpar - Set GED double parameter (GED)

Synopsis
int ged_setdblpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Last group placement x coordinate (STD2)
                              //    1 = Last group placement y coordinate (STD2)
                              //    2 = Default part placement angle
                              //    3 = Copper fill isolation distance (STD2)
                              //    4 = Copper fill min. area size (STD2)
                              //    5 = Copper fill heat trap width (STD2)
                              //    6 = Copper fill heat trap isolation (STD2)
                              //    7 = Hatch line spacing (STD2)
                              //    8 = Hatch line width (STD2)
                              //    9 = Hatch line angle (STD3)
                              //    10 = Net visibility dialog net name list control element width
                              //    11 = Default text size (STD2)
                              //    12 = DRC distance violation text size (STD2)
                              //    13 = Autoplacement Part Expansion (STD2)
                              //    14 = Autoplacement Part Pin Factor [0, 1.0]
                              //    15 = Autoplacement Segment Fit [0, 1.0]
                              //    16 = Autoplacement Part Outline Offset (STD2)
                              //    17 = Default text placement angle (STD3)
                              //    18 = Autorouter Border to copper LE distance (STD2)
                              //    19 = Autorouter Heat trap to drill LE distance (STD2)
                              //    20 = Autorouter Isolation to drill LE distance (STD2)
                              //    21 = Autorouter Power plane connection LE run length (STD2)
                              //    22 = Autorouter Requested special routing grid (STD2)
                              //    23 = Autorouter Split power plane guard range (STD2)
                              //    24 = Autorouter BGA grid tolerance distance (STD2)
                              //    25 = Autorouter SMD power plane connection LE run length (STD2)
                              //    26 = Autorouter Pin to via distance (STD2)
                              //    27 = CAM Gerber standard line width (STD2)
                              //    28 = CAM Minimum distance heat trap to drilling (STD2)
                              //    29 = CAM Minimum distance isolation to drilling (STD2)
                              //    30 = CAM Heat trap to drilling distance tolerance (STD2)
                              //    31 = CAM Isolation to drilling distance tolerance (STD2)
                              //    32 = CAM Power layer border width (STD2)
                              //    33 = CAM Split power plane isolation width (STD2)
                              //    34 = Bus trace width (STD2)
                              //    35 = Bus trace spacing (STD2)
      double;                 // Parameter value
      );
Description
The ged_setdblpar function is used to set Layout Editor double system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ged_getdblpar function can be used to query parameter values set with ged_setdblpar.
See also
Functions ged_getdblpar, ged_getintpar, ged_getstrpar, ged_setintpar, ged_setstrpar.

ged_setdrcmarkmode - Get GED DRC error display mode (GED)

Synopsis
int ged_setdrcmarkmode(       // Returns status
      int [0,1];              // DRC error display mode:
                              //    0 = Error color error marker display
                              //    1 = Highlight color error marker display
      );
Description
The ged_setdrcmarkmode function sets the DRC error marker display mode. The functions returns nonzero for invalid display mode specifications.
See also
Function ged_getdrcmarkmode.

ged_setintpar - Set GED integer parameter (GED)

Synopsis
int ged_setintpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Pickpunktanzeigemodus:
                              //        0 = keine Pickpunktanzeige
                              //        1 = Pickpunktanzeige
                              //        2 = Pick point wide display
                              //        3 = Pick point edit display
                              //    1 = Automatic DRC on layout load mode:
                              //        0 = no automatic DRC
                              //        1 = automatic DRC with verification
                              //        2 = automatic DRC without verification
                              //  [ 2 = use bae_setcolor instead ]
                              //    3 = Info display flag:
                              //        0 = No automatic info display
                              //        1 = Automatic info display
                              //    4 = Info display mode:
                              //        0 = No info display
                              //        1 = Complete info display
                              //        2 = Copper info only display
                              //    5 = Angle edit direction
                              //    6 = Part level element DRC mode:
                              //        0 = Complete DRC
                              //        1 = Consider part macros checked
                              //    7 = Grid corner scan mode:
                              //        0 = No grid corner scan
                              //        1 = Complete grid corner scan
                              //        2 = Current window corner scan
                              //        3 = Dynamic window corner scan
                              //             updated window
                              //    8 = Mincon update mode
                              //    9 = DRC polygon sub-type exclude bits
                              //    10 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: Supress copper fill problem polygon group selection wanrnings
                              //        Bit 2: Supress variant mismatch warnings
                              //        Bit 3: Supress autorouter mode termination warnings
                              //    11 = Layer usage scan mode
                              //    12 = Area polygon edit mode:
                              //        0 = don't close polylines
                              //        1 = always close polylines
                              //        2 = polyline close prompt
                              //    13 = DRC distance display pattern
                              //    14 = Trace edit pick mode:
                              //        0 = snap to input grid
                              //        1 = pin/trace snap at first trace corner
                              //  [ 15 = System parameter - no write access ]
                              //    16 = Trace net deletion query limit
                              //    17 = Plot preview mode:
                              //        0 = none
                              //        1 = plotter pen width
                              //    18 = DRC distance display mode:
                              //        0 = none
                              //        1 = trace distance line
                              //        2 = area distance line
                              //        3 = trace distance pattern
                              //        4 = area distance pattern
                              //    19 = Text layer mirroring mode:
                              //        0 = no layer mirroring
                              //        1 = documentary layer mirroring
                              //        2 = signal and documentary layer mirroring
                              //    20 = Default part mirroring mode
                              //    21 = Autosave interval
                              //    22 = Part airline display mode:
                              //        0 = No airlines
                              //        1 = Static airlines
                              //        2 = Dynamic airlines
                              //    23 = Angle lock toggle mode:
                              //        0 = Pick side default
                              //        1 = Grid toggle
                              //        2 = Shorter side toggle
                              //        3 = Edit direction
                              //    24 = Copper fill heat trap mode:
                              //        0 = Direct Connect
                              //        1 = Pin & Via Heat Traps
                              //        2 = Pin Heat Traps
                              //        3 = Via Heat Traps
                              //        |4 = No Neighbour Pins Flag
                              //        |8 = Heat Trap Trace Flag
                              //        |16 = Only Unconnected Layers
                              //    25 = Copper fill trace mode:
                              //        0 = Round Corners
                              //        1 = Octagonal Corners
                              //        2 = Octagonal Circles
                              //        3 = Octagonal Corners & Circles
                              //    26 = Copper fill island mode:
                              //        0 = Keep Islands
                              //        1 = Delete Islands
                              //        2 = Select Islands
                              //    27 = Copper fill inside area mode:
                              //        0 = Inner Fill Area Fill
                              //        1 = Inner Fill Area Keepout
                              //        |2 = Keepout Areas without Distance
                              //    28 = Copper fill max. heat trap junctions
                              //    29 = Copper fill acute angle mode:
                              //        0 = Acute Angles flat
                              //        1 = Acute Angles round
                              //    30 = Copper fill hatch mode:
                              //        0 = Line Hatching
                              //        1 = Grid Hatching
                              //        |2 = Create Editable Paths
                              //    31 = Net visibility dialog box mode:
                              //        0 = Single column net name list display
                              //        1 = Multi-column net name list display
                              //    32 = Group move display mode:
                              //        0 = Moving Picture Off
                              //        1 = Display Group Layer Only
                              //        2 = Moving Picture On
                              //        3 = Moving Picture All
                              //    33 = Group trace selection mode:
                              //        0 = Select Traces & Vias
                              //        1 = Select Traces Only
                              //        2 = Select Vias Only
                              //    34 = Pick prefered layer (LAY1) without actions
                              //    35 = Clipboard text placement request flag
                              //    36 = Edit direction
                              //    37 = Mincon Area Mode (Bit Patterns):
                              //        0 = No Area Mincon
                              //        |1 = Copper Area Mincon
                              //        |2 = Connected Copper Area Mincon
                              //    38 = Group angle lock mode:
                              //        0 = Keep group angle lock
                              //        1 = Automatically release group angle lock
                              //    39 = Autoplacement Optimizer Passes
                              //    40 = Autoplacement Part Swap On/Off Flag
                              //    41 = Autoplacement Pin/Gate Swap On/Off Flag
                              //    42 = Autoplacement Mirroring Mode:
                              //        0 = No SMD mirroring
                              //        1 = SMD Mirroring
                              //        2 = SMD 2-Pin Mirroring
                              //        3 = Only SMD Mirroring
                              //    43 = Autoplacement Rotation Mode:
                              //        0 = 0-90 Degree Rotation
                              //        1 = 0-270 Degree Rotation
                              //        2 = 0 Degree Rotation
                              //        3 = 90 Degree Rotation
                              //        4 = 0 XOR 90 Degree Rotation
                              //    44 = Autoplacement Retry Passes
                              //    45 = Autoplacement SMD Rotation Mode:
                              //        0 = 0-90 Degree Rotation
                              //        1 = 0-270 Degree Rotation
                              //        2 = 0 Degree Rotation
                              //        3 = 90 Degree Rotation
                              //        4 = 0 XOR 90 Degree Rotation
                              //    46 = Autoplacement Part Outline Layer (LAY1)
                              //    47 = Group visibility mode:
                              //        0 = Select all elements
                              //        1 = Select visible elements only
                              //    48 = Default text mirror mode and text mode (STD14|LAY14)
                              //    49 = Autorouter Number of optimization runs
                              //    50 = Autorouter Optimizer characteristic
                              //    51 = Autorouter Max. number of vias per connection
                              //    52 = Autorouter Router via delay at 1/10"
                              //    53 = Autorouter Router pin channel delay
                              //    54 = Autorouter Cross direction delay
                              //    55 = Autorouter Direction change delay
                              //    56 = Autorouter Path packing delay
                              //    57 = Autorouter Statistical delay base
                              //    58 = Autorouter Max. rip-ups per con.
                              //    59 = Autorouter Max. rip-up level
                              //    60 = Autorouter Max. number of rip-up retries
                              //    61 = Autorouter Router via grid index
                              //    62 = Autorouter Bus structure delay
                              //    63 = Autorouter Re-route area 1 delay
                              //    64 = Autorouter Re-route area 2 delay
                              //    65 = Autorouter Skip existing path delay
                              //    66 = Autorouter Router cleaning run enable
                              //    67 = Autorouter Optim. cleaning run enable
                              //    68 = Autorouter Power connection vector unroutes
                              //    69 = Autorouter Automatic save enable
                              //    70 = Autorouter Corner connection output enable
                              //    71 = Autorouter Unroute output sort mode
                              //    72 = Autorouter Corner mitring mode
                              //    73 = Autorouter Existing traces orientation mode
                              //    74 = Autorouter Standard connection layer delay
                              //    75 = Autorouter Bus connection layer delay
                              //    76 = Autorouter Wave limitation offset
                              //    77 = Autorouter Gridless via check mode
                              //    78 = Autorouter Input error checking mode
                              //    79 = Autorouter Trace to pin entry mode
                              //    80 = Autorouter Requested subgrid factor
                              //    81 = Autorouter Router off-grid delay
                              //    82 = Autorouter Bus recognition and routing mode
                              //    83 = Autorouter SMD pin-via pass enable
                              //    84 = Autorouter Pin/gate swap mode
                              //    85 = Autorouter Requested gridless routing mode
                              //    86 = Autorouter Incremental output mode
                              //    87 = Autorouter Router prefered grid shift
                              //    88 = Autorouter Router prefered grid delay
                              //    89 = Autorouter Outside net area delay
                              //    90 = Autorouter Last optimization par. change mode
                              //    91 = Autorouter Auto rip-up parameter mode
                              //    92 = Autorouter Prefered routing direction mode
                              //    93 = Autorouter Optimizer order mode
                              //    94 = Autorouter Via rip-up flag
                              //    95 = Autorouter Routing window border size
                              //    96 = Autorouter BGA fan out enable flag
                              //    97 = Autorouter Fan out gridded check mode
                              //    98 = Autorouter Alternate via shift mode
                              //    99 = Autorouter Full via evaluation mode
                              //    100 = Autorouter Micro via mode
                              //    101 = Autorouter Forced dir. max. derivation
                              //    102 = Autorouter Routing frame window flag
                              //    103 = Autorouter Requested pad entry subgrid
                              //    104 = Autorouter Power layer via mode
                              //    105 = Autorouter Via check mode
                              //    106 = Autorouter Large net connection count
                              //    107 = Autorouter Autorouting active flag
                              //    108 = CAM Heat trap base angle
                              //    109 = Single corner edit flag
                              //    110 = Resize with round corners flag
                              //    111 = Hidden DRC errors display flag
                              //    112 = DRC violation elements scan flag
                              //    113 = Part placement trace move mode
                              //        0 = No trace move
                              //        1 = Trace end move
                              //        2 = Trace segment move
                              //    114 = Polygon edit autocomplete flag
                              //    115 = Board Outline alternative documentary layer (LAY1)
                              //    116 = Trace join query mode:
                              //        0 = Never join traces
                              //        1 = Always join traces
                              //        2 = Query for trace join
                              //    117 = Trace display class bits (LAY15)
                              //    118 = Text display class bits (LAY15)
                              //    119 = Copper polygon display class bits (LAY15)
                              //    120 = Forbidden area polygon display class bits (LAY15)
                              //    121 = Border polygon display class bits (LAY15)
                              //    122 = Connected copper polygon display class bits (LAY15)
                              //    123 = Documentary line display class bits (LAY15)
                              //    124 = Documentary area display class bits (LAY15)
                              //    125 = Copper fill with cutout polygon display class bits (LAY15)
                              //    126 = Hatched copper polygon display class bits (LAY15)
                              //    127 = Split power plane polygon display class bits (LAY15)
                              //    128 = Flag - Color table saved
                              //    129 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    130 = Airline clipping mode:
                              //        0 = No unroutes clipping
                              //        1 = Clip unroutes without workspace target
                              //    131 = Trace collision mode:
                              //        -1 = Query for operation
                              //        0 = Ignore collisions
                              //        1 = Delete colliding traces
                              //        2 = Delete colliding segments
                              //        3 = Cut colliding segments
                              //    132 = Layout trace merge query mode:
                              //        0 = Never merge layout traces
                              //        1 = Always merge layout traces
                              //        2 = Query merge mode
                              //    133 = Part trace merge query mode:
                              //        0 = Never merge part traces
                              //        1 = Always merge part traces
                              //        2 = Query merge mode
                              //    135 = Element move polygon display mode:
                              //        0 = Display outline
                              //        1 = Display filled
                              //    136 = Group move airline display mode:
                              //        0 = Airline Display Off
                              //        1 = Display Group Part Pin Airlines
                              //    137 = Trace collision distance check mode:
                              //        0 = Use DRC distance for collision check
                              //        1 = Consider only crossings as collision
                              //    138 = Trace segment bundle pick mode:
                              //        0 = Continuous segment pick
                              //        1 = Pick first and last bundle segment
                              //    139 = Trace segment insert pick mode:
                              //        0 = 3 click selection
                              //        1 = 2 click selection
                              //    140 = Part edit DRC:
                              //        0 = no part edit online DRC
                              //        1 = part edit online DRC
                              //    141 = Drill tool table optimization flag
                              //    142 = Bus trace count
                              //    143 = Edit bus trace count
                              //    144 = Bus trace creation mode:
                              //        0 = Create trace bundle
                              //        1 = Create seperate traces
                              //    145 = Bus trace corner mode:
                              //        0 = Create angle corners
                              //        1 = Create arc corners
                              //    146 = Silk screen layer (LAY1)
                              //    147 = Macro outline display mode:
                              //        0 = No macro outline display
                              //        1 = Display macro outline at moved references
                              //        2 = Display macro outlines
      int;                    // Parameter value
      );
Description
The ged_setintpar function is used to set Layout Editor integer system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ged_getintpar function can be used to query parameter values set with ged_setintpar.
See also
Functions ged_getdblpar, ged_getintpar, ged_getstrpar, ged_setdblpar, ged_setstrpar.

ged_setlaydefmode - Set GED default layer mode (GED)

Synopsis
int ged_setlaydefmode(        // Returns status
      int [0,2];              // Default layer mode:
                              //    0 = automatic layer default disabled
                              //    1 = used edit layer as layer default
                              //    2 = last used layer as layer default
      );
Description
The ged_setlaydefmode function sets the Layout Editor default layer mode. The function returns zero if the assignment was successful or non-zero on error.
See also
Functions ged_getlaydefmode, ged_getlayerdefault, ged_setlayerdefault.

ged_setlayerdefault - Set GED default layer (GED)

Synopsis
int ged_setlayerdefault(      // Returns status
      int;                    // Layer (LAY1)
      );
Description
The ged_setlayerdefault function sets the Layout Editor default layer. The function returns zero if the assignment was successful or non-zero on error.
See also
Functions ged_getlaydefmode, ged_getlayerdefault, ged_setlaydefmode.

ged_setmincon - Set GED Mincon function type (GED)

Synopsis
int ged_setmincon(            // Returns status
      int [0,8];              // Required Mincon function type (LAY10)
      );
Description
The ged_setmincon function sets the currently active Layout Editor Mincon function type, i.e., the airline display mode (LAY10). The function returns nonzero if an invalid Mincon function type value has been specified.

ged_setnetattrib - Set GED net attribute value (GED)

Synopsis
int ged_setnetattrib(         // Returns status
      string;                 // Net name
      string;                 // Attribute name
      string;                 // Attribute value
      );
Description
The ged_setnetattrib function assigns a value to the given attribute of the name-specified net. Attribute values with a maximum length of up to 40 characters can be stored. The function returns zero on successful attribute value assignment, (-1) if no valid element is loaded, (-2) on missing and/or invalid parameters, (-3) if the net has not been found or (-4) if the attribute with the given name is not defined on the specified net.

ged_setpathwidth - Set GED path standard width (GED)

Synopsis
int ged_setpathwidth(         // Returns status
      double ]0.0,[;          // Required small path width (STD2)
      double ]0.0,[;          // Required wide path width (STD2)
      );
Description
The ged_setpathwidth function sets the currently active Layout Editor standard widths for small and wide traces. The function returns nonzero if invalid an invalid width value has been specified.

ged_setpickelem - GED Defaultpickelement setzen (GED)

Synopsis
int ged_setpickelem(          // Returns status
      index L_FIGURE;         // Default pick element
      );
Description
The ged_setpickelem function sets a default element for subsequent Layout Editor pick operations. The function returns zero if done or nonzero on error.
See also
Function ged_pickelem.

ged_setpickmode - Set GED element pick mode (GED)

Synopsis
int ged_setpickmode(          // Returns status
      int [0,2];              // Element pick mode:
                              //    0 = Pick peference layer pick
                              //    1 = Pick with element selection
                              //	2 = Exclusive pick preference layer pick
      );
Description
The ged_setpickmode function sets the Layout Editor element pick mode. The function returns nonzero for invalid pick mode specifications.
See also
Function ged_getpickmode.

ged_setpickpreflay - Set GED pick preference layer (GED)

Synopsis
int ged_setpickpreflay(       // Returns status
      int;                    // Required pick preference layer (LAY1)
      );
Description
The ged_setpickpreflay function sets the currently active Layout Editor pick preference layer for element selection (LAY1). The function returns nonzero if an invalid pick preference layer has been specified.

ged_setplantoplay - Set GED layout top layer (GED)

Synopsis
int ged_setplantoplay(        // Returns status
      int [0,99];             // Required layout top layer (LAY1)
      );
Description
The ged_setplantoplay function defines the Layout Editor and/or layout element top layer setting. The function returns nonzero if an invalid signal layer has been specified.

ged_setsegmovmode - Set GED trace segment move mode (GED)

Synopsis
int ged_setsegmovmode(        // Returns status
      int [0,12];             // Trace segment move mode:
                              //    0 = Move without neighbours
                              //    1 = Move with neighbours
                              //    2 = Adjust neighbours
                              //    3 = Adjust neighbours without vias
                              //    8 = Adjust next neighbours only
                              //    |4 = Open trace ends follow segment movement
      );
Description
The ged_setsegmovmode function sets the Layout Editor trace segment move mode. The function returns zero if the assignment was successful or non-zero on error.
See also
Function ged_getsegmovmode.

ged_setstrpar - Set GED string parameter (GED)

Synopsis
int ged_setstrpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //  [ 0 = System parameter - no write access ]
                              //  [ 1 = System parameter - no write access ]
                              //    2 = Last placed text string
                              //    3 = Standard library name
                              //  [ 4 = System parameter - no write access ]
                              //    5 = Drill naming base
                              //    6 = Drill part macro name pattern
                              //    7 = Drill padstack macro name pattern
                              //    8 = Input prompt override string
                              //  [ 9 = System parameter - no write access ]
                              //    10 = Autosave path name
      string;                 // Parameter value
      );
Description
The ged_setstrpar function is used to set Layout Editor string system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ged_getstrpar function can be used to query parameter values set with ged_setstrpar.
See also
Functions ged_getdblpar, ged_getintpar, ged_getstrpar, ged_setdblpar, ged_setintpar.

ged_setviaoptmode - Set GED trace via optimization mode (GED)

Synopsis
int ged_setviaoptmode(        // Returns status
      int [0,1];              // Trace via optimization mode:
                              //    0 = Via optimization
                              //    1 = Keep vias
      );
Description
The ged_setviaoptmode function sets the Layout Editor trace via optimization mode. The function returns zero if the assignment was successful or non-zero on error.
See also
Function ged_getviaoptmode.

ged_setwidedraw - Set GED wide line display start width (GED)

Synopsis
int ged_setwidedraw(          // Returns status
      double ]0.0,[;          // Required width value (STD2)
      );
Description
The ged_setwidedraw function sets the current Layout Editor wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons. The function returns nonzero if an invalid width value is specified.

ged_storedrill - Place GED drill hole (GED)

Synopsis
int ged_storedrill(           // Returns status
      double;                 // Drill X coordinate (STD2)
      double;                 // Drill Y coordinate (STD2)
      double ]0.0,[;          // Drill radius (STD2)
      int [0,[;               // Drill class (LAY5)
      );
Description
The ged_storedrill function stores a drill hole with the given placement parameters to the currently loaded layout element. The function returns nonzero on wrong environment or missing/invalid parameters.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_storepart - Place GED part or padstack (GED)

Synopsis
int ged_storepart(            // Returns status
      string;                 // Reference name
      string;                 // Library symbol name
      double;                 // X coordinate (STD2)
      double;                 // Y coordinate (STD2)
      double;                 // Rotation angle (STD3)
      int [0,1];              // Mirror mode (STD14)
      );
Description
The ged_storepart function stores a part (or padstack) with the given placement parameters to the currently loaded layout (or part) element. The next unplaced net list part is used if an empty string is passed for the reference name. The function returns zero if the part has been successfully placed, (1) if the part pins do not match the net list specifications, (-1) on wrong environment or missing/invalid parameters, (-2) if all parts are placed already, (-3) if the specified part is placed already, (-4) if the part cannot be loaded or (-6) if the part data could not be copied to the current job file.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ged_storepath - Place GED internal polygon as path (GED)

Synopsis
int ged_storepath(            // Returns status
      int [0,99];             // Path layer (LAY1)
      double ]0.0,[;          // Path width (STD2)
      );
Description
The ged_storepath function generates a trace on the currently loaded layout and/or part using the specified placement parameters. The trace polygon points are taken from the internal polygon point list previously stored with bae_storepoint. The function returns zero if the trace has been successfully generated, (-1) on invalid environment, (-2) on missing and/or invalid parameters or (-3) if the point list is invalid.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
See also
Functions bae_storepoint, ged_drcpath.

ged_storepoly - Place GED internal polygon (GED)

Synopsis
int ged_storepoly(            // Returns status
      int;                    // Polygon layer (LAY1)
      int [1,9];              // Polygon type (LAY4)
      string;                 // Polygon net name (for LAY4 types 4, 6 and 9)
      int [0,18];             // Polygon mirror mode (LAY3)
      );
Description
The ged_storepoly function generates a polygon on the currently loaded layout element using the specified placement parameters. The polygon points are taken from the internal polygon point list previously stored with bae_storepoint. The function returns zero if the polygon has been successfully generated, (-1) on invalid environment, (-2) on missing and/or invalid parameters or (-3) if the point list is not valid for the specified polygon type.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
See also
Functions bae_storepoint, ged_drcpoly.

ged_storetext - Place GED text (GED)

Synopsis
int ged_storetext(            // Returns status
      string;                 // Text string
      double;                 // Text X coordinate (STD2)
      double;                 // Text Y coordinate (STD2)
      double;                 // Text rotation angle (STD3)
      double ]0.0,[;          // Text size (STD2)
      int;                    // Text layer (LAY1)
      int;                    // Text mirror mode and style (STD14|LAY14)
      );
Description
The ged_storetext function generates a text on the currently loaded layout element using the specified placement parameters. The function return value is nonzero on wrong environment or missing/invalid parameters.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops. The input text string can be stored to a maximum of up to 40 characters; longer strings cause the function to return with an invalid parameter error code.
See also
Function ged_attachtextpos.

ged_storeuref - Place GED unnamed reference (via or pad) (GED)

Synopsis
int ged_storeuref(            // Returns status
      string;                 // Library symbol name
      double;                 // Reference X coordinate (STD2)
      double;                 // Reference Y coordinate (STD2)
      double;                 // Reference rotation angle (STD3)
      int;                    // Reference layer (LAY1)
      int [0,1];              // Reference mirror (STD14)
      );
Description
The ged_storeuref function stores an unnamed reference (via or pad) with the given placement parameters to the currently loaded layout element (layout, part or padstack). For vias, the reference mirror mode, the reference layer and the rotation angle are ignored. The function returns zero if the reference has been successfully placed, (-1) on wrong environment or missing/invalid parameters, (-2) if the reference cannot be loaded or (-3) if the reference data could not be copied to the current job file.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
 

C.4.3 Autorouter Functions

The following User Language system functions are assigned to caller type AR; i.e., they can be called from the Autorouter interpreter environment of the Bartels AutoEngineer:


ar_asklayer - Autorouter layer selection (AR)

Synopsis
int ar_asklayer(              // Returns status
      & int;                  // Returns selected layer (LAY1|LAY9)
      int [0,5];              // Layer query type:
                              //    0 = Documentary layers and signal layers
                              //    1 = Signal layers
                              //    2 = Signal layers
                              //        (including Top Layer and All Layers)
                              //    3 = Documentary layers
                              //    4 = Signal and power layers
                              //    5 = arbitrary display element types
      );
Description
The ar_asklayer function activates an Autorouter layer selection menu. The layer query type designates the type of layers and/or display element types provided for selection. The function returns zero if a valid layer has been selected or (-1) if the layer selection was aborted.

ar_delelem - Delete Autorouter figure list element (AR)

Synopsis
int ar_delelem(               // Returns status
      & index L_FIGURE;       // Element
      );
Description
The ar_delelem function deletes the given figure list element from the figure list. The function returns zero if the element was successfully deleted or nonzero on error.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
See also
Function ar_drawelem.

ar_drawelem - Redraw Autorouter figure list element (AR)

Synopsis
void ar_drawelem(
      index L_FIGURE;         // Element
      int [0, 4];             // Drawing mode (STD19)
      );
Description
The ar_drawelem function updates the display of the given figure list element using the specified drawing mode.
See also
Function ar_delelem.

ar_elemangchg - Change Autorouter figure list element rotation angle (AR)

Synopsis
int ar_elemangchg(            // Returns status
      & index L_FIGURE;       // Element
      double;                 // New rotation angle (STD3)
      );
Description
The ar_elemangchg function changes the rotation angle of the given figure list element. The rotation angle must be in radians. The function returns zero if the element has been successfully rotated, (-1) if the figure list element is invalid or (-2) if the figure list element cannot be rotated.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_elemfixchg - Change Autorouter figure list element fixed flag (AR)

Synopsis
int ar_elemfixchg(            // Returns status
      & index L_FIGURE;       // Element
      int [0,1];              // New fixed flag (STD11)
      );
Description
The ar_elemfixchg function changes the fixed flag of the given figure list element. The fixed flag value 0 unfixes the element, the fixed flag value 1 fixes the element. The function returns zero if the element fixed flag has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element cannot be fixed.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_elemlaychg - Change Autorouter figure list element layer (AR)

Synopsis
int ar_elemlaychg(            // Returns status
      & index L_FIGURE;       // Element
      int;                    // New layer (LAY1)
      );
Description
The ar_elemlaychg function changes the layer of the given figure list element. The layer can be set for polygons, traces, texts, pads (on padstack level) and drill holes. For drill holes the layer input parameter specifies the drill class code. The function returns zero if the element layer has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element layer cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_elemmirrchg - Change Autorouter figure list element mirror mode (AR)

Synopsis
int ar_elemmirrchg(           // Returns status
      & index L_FIGURE;       // Element
      int [0,18];             // New mirror mode (STD14|LAY3)
      );
Description
The ar_elemmirrchg function changes the mirror mode of the given figure list element. The mirror mode can be set for polygons, texts and references. The function returns zero if the element mirror mode has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element mirror mode cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_elemposchg - Change Autorouter figure list element position (AR)

Synopsis
int ar_elemposchg(            // Returns status
      & index L_FIGURE;       // Element
      double;                 // New X coordinate (STD2)
      double;                 // New Y coordinate (STD2)
      );
Description
The ar_elemposchg function changes the position of the given figure list element. Polygons and/or traces are replaced to set the first point of the polygon/trace to the specified position. The function returns zero if the element has been successfully repositioned, (-1) if the figure list element is invalid or (-2) if the figure list element position cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_elemsizechg - Change Autorouter figure list element size (AR)

Synopsis
int ar_elemsizechg(           // Returns status
      & index L_FIGURE;       // Element
      double;                 // New size (STD2)
      );
Description
The ar_elemsizechg function changes the size of the given figure list element. The size can be changed for texts, drill holes and traces. For traces, a trace width change is performed. The functions value is zero if the element size has been successfully changed, (-1) if the figure list element is invalid or (-2) if the figure list element size cannot be set.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_getdblpar - Get Autorouter double parameter (AR)

Synopsis
int ar_getdblpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Net visibility dialog net name list control element width
                              //    1 = User-defined routing grid
      & double;               // Returns parameter value
      );
Description
The ar_getdblpar function is used to query Autorouter double parameters previously set with ar_setdblpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ar_getintpar, ar_getstrpar, ar_setdblpar, ar_setintpar, ar_setstrpar.

ar_getintpar - Get Autorouter integer parameter (AR)

Synopsis
int ar_getintpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Top layer color code
                              //    1 = Mincon update mode
                              //    2 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: not used in Autorouter
                              //        Bit 2: Suppress variant mismatch warnings
                              //    3 = Autosave interval
                              //    4 = Net visibility dialog box mode:
                              //        0 = Single column net name list display
                              //        1 = Multi-column net name list display
                              //    5 = Routing layer count
                              //    6 = Routing grid code:
                              //        0 = 1/20 Inch (1.27 mm) Standard
                              //        1 = 1/40 Inch (0.635 mm) Standard
                              //        2 = 1/50 Inch (0.508 mm) Standard
                              //        3 = 1/60 Inch (0.4233 mm) Standard
                              //        4 = 1/80 Inch (0.3175 mm) Standard
                              //        5 = 1/100 Inch (0.254 mm) Standard
                              //        6 = 1/40 Inch (0.635 mm) no Offset
                              //        7 = 1/60 Inch (0.4233 mm) no Offset
                              //        8 = 1/80 Inch (0.3175 mm) no Offset
                              //        9 = 1/100 Inch (0.254 mm) with Offset
                              //        -1 = Other Grid
                              //        -2 = Other Grid with Offset
                              //    7 = Mincon-Flächenmodus (Bitmuster):
                              //        0 = Kein Flächen-Mincon
                              //        |1 = Kupferflächen-Mincon
                              //        |2 = Potentialflächen-Mincon
                              //    8 = Flag - Color table saved
                              //    9 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    10 = Drill tool table optimization flag
      & int;                  // Returns parameter value
      );
Description
The ar_getintpar function is used to query Autorouter integer parameters previously set with ar_setintpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ar_getdblpar, ar_getstrpar, ar_setdblpar, ar_setintpar, ar_setstrpar.

ar_getmincon - Get Autorouter Mincon function type (AR)

Synopsis
int ar_getmincon(             // Returns Mincon function type (LAY10)
      );
Description
The ar_getmincon function returns the currently active Autorouter Mincon function type, i.e., the airline display mode (LAY10).

ar_getpickpreflay - Get Autorouter pick preference layer (AR)

Synopsis
int ar_getpickpreflay(        // Returns pick preference layer (LAY1)
      );
Description
The ar_getpickpreflay function returns the currently active Autorouter pick preference layer for element selection (LAY1).

ar_getstrpar - Get Autorouter string parameter (AR)

Synopsis
int ar_getstrpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Autosave path name
      & string;               // Returns parameter value
      );
Description
The ar_getstrpar function is used to query Autorouter string parameter settings. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions ar_getdblpar, ar_getintpar, ar_setdblpar, ar_setintpar, ar_setstrpar.

ar_getwidedraw - Get Autorouter wide line display start width (AR)

Synopsis
double ar_getwidedraw(        // Returns width value (STD2)
      );
Description
The ar_getwidedraw function returns the current Autorouter wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons.

ar_highlnet - Set Autorouter net highlight mode (AR)

Synopsis
int ar_highlnet(              // Returns status
      int [0,[;               // Net tree number
      int [0,1];              // Highlight mode (0 = off, 1 = on)
      );
Description
The ar_highlnet function sets the highlight mode of the net specified by the given net tree number. A highlight mode value of 1 highlights the net, a highlight mode value of 0 de-highlight the net. The function returns nonzero if an invalid net tree number and/or highlight mode value has been specified.

ar_partnamechg - Change Autorouter net list part name (AR)

Synopsis
int ar_partnamechg(           // Returns status
      string;                 // Old part name
      string;                 // New part name
      );
Description
The ar_partnamechg function changes the name of a net list part. The function returns nonzero if the part name has been successfully changed, (-1) for invalid input parameters, (-2) if the specified part is not yet placed, (-3) if the specified part does not exist in the net list, (-4) if the new name exists already and (-5) on multiple name change requests (e.g., a to b and then b to c) in one program run.
Warning
This function changes the net list and therefore requires a Backannotation. It is strongly recommended not to use this function in L_CPART index loops since the current L_CPART index variables are invalid after calling ar_partnamechg.

ar_pickelem - Pick Autorouter figure list element with mouse (AR)

Synopsis
int ar_pickelem(              // Returns status
      & index L_FIGURE;       // Returns picked element
      int [1,9];              // Pick element type (LAY6 except 7)
      );
Description
The ar_pickelem function activates an interactive figure list element pick request (with mouse). The required pick element type is specified with the second parameter. The picked figure list element index is returned with the first parameter. The function returns zero if an element has been picked or (-1) if no element of the required type has been found at the pick position.

ar_setdblpar - Set Autorouter double parameter (AR)

Synopsis
int ar_setdblpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Net visibility dialog net name list control element width
                              //  [ 1 = System parameter - no write access ]
      double;                 // Parameter value
      );
Description
The ar_setdblpar function is used to set Autorouter double system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ar_getdblpar function can be used to query parameter values set with ar_setdblpar.
See also
Functions ar_getdblpar, ar_getintpar, ar_getstrpar, ar_setintpar, ar_setstrpar.

ar_setintpar - Set Autorouter integer parameter (AR)

Synopsis
int ar_setintpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //  [ 0 = use bae_setcolor instead ]
                              //    1 = Mincon update mode
                              //    2 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: not used in Autorouter
                              //        Bit 2: Supress variant mismatch warnings
                              //    3 = Autosave interval
                              //    4 = Net visibility dialog box mode:
                              //        0 = Single column net name list display
                              //        1 = Multi-column net name list display
                              //  [ 5 = System parameter - no write access ]
                              //  [ 6 = System parameter - no write access ]
                              //    7 = Mincon Area Mode (Bit Patterns):
                              //        0 = No Area Mincon
                              //        |1 = Copper Area Mincon
                              //        |2 = Connected Copper Area Mincon
                              //    8 = Flag - Color table saved
                              //    9 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    10 = Drill tool table optimization flag
      int;                    // Parameter value
      );
Description
The ar_setintpar function is used to set Autorouter integer system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ar_getintpar function can be used to query parameter values set with ar_setintpar.
See also
Functions ar_getdblpar, ar_getintpar, ar_getstrpar, ar_setdblpar, ar_setstrpar.

ar_setmincon - Set Autorouter Mincon function type (AR)

Synopsis
int ar_setmincon(             // Returns status
      int [0,8];              // Required Mincon function type (LAY10)
      );
Description
The ar_setmincon function sets the currently active Autorouter Mincon function type, i.e., the airline display mode (LAY10). The function returns nonzero if an invalid Mincon function type value has been specified.

ar_setnetattrib - Set Autorouter net attribute value (AR)

Synopsis
int ar_setnetattrib(          // Returns status
      string;                 // Net name
      string;                 // Attribute name
      string;                 // Attribute value
      );
Description
The ar_setnetattrib function assigns a value to the given attribute of the name-specified net. Attribute values with a maximum length of up to 40 characters can be stored. The function returns zero if the attribute value assignment was successful, (-1) if no valid element is loaded, (-2) on missing and/or invalid parameters, (-3) if the net has not been found or (-4) if the attribute with the given name is not defined on the specified net.

ar_setpickpreflay - Set Autorouter pick preference layer (AR)

Synopsis
int ar_setpickpreflay(        // Returns status
      int;                    // Required pick preference layer (LAY1)
      );
Description
The ar_setpickpreflay function sets the currently active Autorouter pick preference layer for element selection (LAY1). The function returns nonzero if an invalid pick preference layer has been specified.

ar_setplantoplay - Set Autorouter layout top layer (AR)

Synopsis
int ar_setplantoplay(         // Returns status
      int [0,99];             // Required layout top layer (LAY1)
      );
Description
The ar_setplantoplay function defines the Autorouter and/or layout element top layer setting. The function returns nonzero if an invalid signal layer has been specified.

ar_setstrpar - Set Autorouter string parameter (GED)

Synopsis
int ar_setstrpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Autosave path name
      string;                 // Parameter value
      );
Description
The ar_setstrpar function is used to set Autorouter string system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The ar_getstrpar function can be used to query parameter values set with ar_setstrpar.
See also
Functions ar_getdblpar, ar_getintpar, ar_getstrpar, ar_setdblpar, ar_setintpar.

ar_setwidedraw - Set Autorouter wide line display start width (AR)

Synopsis
int ar_setwidedraw(           // Returns status
      double ]0.0,[;          // Required width value (STD2)
      );
Description
The ar_setwidedraw function sets the current Autorouter wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons. The function returns nonzero if an invalid width value has been specified.

ar_storepart - Place Autorouter part or padstack (AR)

Synopsis
int ar_storepart(             // Returns status
      string;                 // Reference name
      string;                 // Library symbol name
      double;                 // X coordinate (STD2)
      double;                 // Y coordinate (STD2)
      double;                 // Rotation angle (STD3)
      int [0,1];              // Mirror mode (STD14)
      );
Description
The ar_storepart function stores a part (or padstack) with the given placement parameters to the currently loaded layout (or part) element. The next unplaced and selected net list part is used if an empty string is passed for the reference name. The function returns zero if the part has been successfully placed, (-1) on wrong environment or missing/invalid parameters, (-2) if all parts are already placed, (-3) if the specified part is already placed, (-4) if the part cannot be loaded, (-5) if the part pins do not match the net list specifications or (-6) if the part data could not be copied to the current job file.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_storepath - Place Autorouter internal polygon as path (AR)

Synopsis
int ar_storepath(             // Returns status
      int [0,99];             // Path layer (LAY1)
      double ]0.0,[;          // Path width (STD2)
      );
Description
The ar_storepath function generates a trace on the currently loaded layout or part using the specified placement parameters. The trace polygon points are taken from the internal polygon point list previously stored with bae_storepoint. The function returns zero if the trace has been successfully generated, (-1) on invalid environment, (-2) on missing and/or invalid parameters or (-3) if the point list is invalid.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.

ar_storeuref - Place Autorouter unnamed reference (via or pad) (AR)

Synopsis
int ar_storeuref(             // Returns status
      string;                 // Library symbol name
      double;                 // Reference X coordinate (STD2)
      double;                 // Reference Y coordinate (STD2)
      double;                 // Reference rotation angle (STD3)
      int;                    // Reference layer (LAY1)
      int [0,1];              // Reference mirror (STD14)
      );
Description
The ar_storeuref function stores an unnamed reference (via or pad) with the given placement parameters to the currently loaded layout element (layout, part or padstack). For vias, the reference mirror mode, the reference layer and the rotation angle are ignored. The function returns zero if the reference has been successfully placed, (-1) on wrong environment or missing/invalid parameters, (-2) if the reference cannot be loaded or (-3) if the reference data could not be copied to the current job file.
Warning
This function changes the current figure list and should be used carefully in forall loops for iterating L_FIGURE index variables to avoid unpredictable results on figure list access and prevent from running into endless loops.
 

C.4.4 CAM Processor Functions

The following User Language system functions are assigned to caller type CAM; i.e., they can be called from the CAM Processor interpreter environment of the Bartels AutoEngineer:


cam_askplotlayer - CAM plot layer selection (CAM)

Synopsis
int cam_askplotlayer(         // Returns status
      & int;                  // Returns selected layer (LAY1)
      );
Description
The cam_askplotlayer function activates a CAM Processor layer selection menu. The function returns zero if a valid layer has been selected or (-1) if the layer selection has been aborted.

cam_getdblpar - Get CAM double parameter (CV)

Synopsis
int cam_getdblpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    [ 0 = System parameter; write-only access ]
                              //    1 = Pixel bitmap resolution (STD2)
                              //    2 = Last bitmap plot pixel ratio
      & double;               // Returns parameter value
      );
Description
The cam_getdblpar function is used to query CAM Processor double parameters previously set with cam_setdblpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions cam_getintpar, cam_setdblpar, cam_setintpar.

cam_getdrlaccuracy - CAM drill tool tolerance query (CAM)

Synopsis
double cam_getdrlaccuracy(    // Drill tool tolerance (STD2)
      );
Description
The cam_getdrlaccuracy function returns the CAM Processor drill tool tolerance.
See also
Function cam_setdrlaccuracy.

cam_getgenpltparam - CAM general plot parameter query (CAM)

Synopsis
void cam_getgenpltparam(
      & int;                  // Plot all layers off/on (1=on, 0=off)
      & int;                  // Plot border off/on flag (1=on, 0=off)
      & int;                  // Plot rotate off/on flag:
                              //    0 = rotate 0 degree
                              //    1 = rotate 90 degree left
      & int;                  // Plot mirror mode (CAM1)
      & int;                  // Plot markers off/on flag:
                              //    0 = off
                              //    1 = on
      & double;               // Plot accuracy (STD2)
      & double;               // Plot origin X coordinate (STD2)
      & double;               // Plot origin Y coordinate (STD2)
      );
Description
The cam_getgenpltparam function returns the CAM Processor general plot parameters.

cam_getgerberapt - CAM Gerber aperture definition query (CAM)

Synopsis
int cam_getgerberapt(         // Returns status
      int [1,900];            // Aperture table index
      & int;                  // Aperture D-code:
                              //    10..999 = valid D-codes
                              //       (-1) = aperture not defined
      & int;                  // Aperture type:
                              //    0 = special aperture
                              //    1 = round aperture
                              //    2 = square aperture
                              //    3 = thermal aperture (heat trap)
                              //    4 = rectangular aperture
      & int;                  // Aperture drawing mode:
                              //    0 = aperture for all drawing modes
                              //    1 = aperture for flash structures
                              //    2 = aperture for line structures
      & double;               // Aperture dimension/X size (STD2)
      & double;               // Aperture dimension/Y size (STD2)
      );
Description
The cam_getgerberapt function gets the definition of the Gerber aperture stored at the given table index of the aperture table currently loaded to the CAM Processor. A D-code of (-1) is returned if there is no aperture defined at the specified table position. The function returns nonzero on missing or invalid parameters.

cam_getgerberparam - CAM Gerber plot parameter query (CAM)

Synopsis
void cam_getgerberparam(
      & string;               // Gerber plot file name
      & double;               // Gerber standard line width (STD2)
      & int;                  // Gerber format (CAM4)
      & int;                  // Optimized Gerber output mode:
                              //    0 = Optimization off
                              //    1 = Optimization on
      & int;                  // Gerber fill mode:
                              //    0 = line fill
                              //    1 = multi-aperture fill
                              //    2 = G36/G37 fill
      & int;                  // Gerber arc output mode:
                              //    0 = use arc interpolation
                              //    1 = use Gerber I/J arc commands
      & int;                  // Extended Gerber (RS-274-X) mode:
                              //    0 = no Extended Gerber
                              //    1 = Extended Gerber with
                              //         standard aperture table
                              //    2 = Extended Gerber with
                              //         dynamic aperture table
      );
Description
The cam_getgerberparam function returns the CAM Processor Gerber plot parameters.

cam_gethpglparam - CAM HP-GL plot parameter query (CAM)

Synopsis
void cam_gethpglparam(
      & string;               // HP-GL plot file name
      & double;               // HP-GL plot scaling factor
      & double;               // HP-GL plotter speed (-1.0=full speed)
      & double;               // HP-GL plotter pen width (STD2)
      & int;                  // HP-GL plot area fill mode:
                              //    0 = fill off
                              //    1 = fill on
      );
Description
The cam_gethpglparam function returns the CAM Processor HP-GL plot parameters.

cam_getintpar - Get CAM integer parameter (CAM)

Synopsis
int cam_getintpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Top layer color code
                              //    1 = Heat trap base angle
                              //    2 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: not used in CAM Processor
                              //        Bit 2: Suppress variant mismatch warnings
                              //    3 = Area mirror visibility mode:
                              //        0 = Normal area mirror visibility
                              //        1 = Disable area mirror visibility
                              //    4 = Last pixel plot result type:
                              //        -1 = No pixel plot yet
                              //        0 = Board outline pixel ratio
                              //        1 = Element borders pixel ratio
                              //    5 = Last pixel plot total pixel count
                              //    6 = Last pixel plot copper pixel count
                              //    7 = Generic printer scale mode:
                              //        0 = Fixed scale factor
                              //        1 = Scale to paper size
                              //    8 = Flag - Color table saved
                              //    9 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    10 = Bitmap outline milling mode:
                              //        0 = No Milling
                              //        1 = Draw filled outline with millings
                              //    11 = Generic printer drawing mode:
                              //        0 = Set Color
                              //        1 = Merge Color
                              //    12 = Batch output flag
                              //    13 = Drill tool table optimization flag
                              //    14 = Plot preview mode:
                              //        0 = 0 = None
                              //        1 = 1 = Plotter pen width
      & int;                  // Returns parameter value
      );
Description
The cam_getintpar function is used to query CAM Processor integer parameters previously set with cam_setintpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions cam_getdblpar, cam_setdblpar, cam_setintpar.

cam_getplotlaycode - CAM plot layer code query (CAM)

Synopsis
int cam_getplotlaycode(       // Returns HP-GL plot pen number (CAM4)
      int;                    // Layer number (LAY1)
      );
Description
The cam_getplotlaycode function returns the layer-specific HP-GL plot pen number currently selected for multilayer plots. The layer-specific HP-GL pen number is also used for non-HP-GL multilayer plots where positive pen numbers denote layers currently selected for output and negative pen numbers denote layers not selected for output.
See also
Function cam_setplotlaycode.

cam_getpowpltparam - CAM power layer plot parameter query (CAM)

Synopsis
void cam_getpowpltparam(
      & double;               // Min. distance heat-trap to drill (STD2)
      & double;               // Min. distance isolation to drill (STD2)
      & double;               // Tolerance heat-trap to drill (STD2)
      & double;               // Tolerance isolation to drill (STD2)
      & double;               // Power layer border width (STD2)
      & double;               // Power plane isolation width (STD2)
      );
Description
The cam_getpowpltparam function returns the CAM Processor power layer plot parameters.

cam_getwidedraw - CAM wide line display start width query (CAM)

Synopsis
double cam_getwidedraw(       // Returns width value (STD2)
      );
Description
The cam_getwidedraw function returns the CAM Processor wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons.

cam_plotgerber - CAM Gerber photo plot output (CAM)

Synopsis
int cam_plotgerber(           // Returns status
      int;                    // Gerber plot layer (LAY1)
      string;                 // Gerber plot file name
      double [0.00001,0.01];  // Gerber standard line width (STD2)
      double ]0.00000000053,[;// Gerber plotter unit length (CAM2)
      int [0,1];              // Optimized Gerber output mode:
                              //    0 = Optimization off
                              //    1 = Optimization on
      int [0,2];              // Gerber fill mode:
                              //    0 = line fill
                              //    1 = multi-aperture fill
                              //    2 = G36/G37 fill
      int [0,1];              // Gerber arc output mode:
                              //    0 = use arc interpolation
                              //    1 = use Gerber I/J arc commands
      int [0,2];              // Extended Gerber (RS-274-X) mode:
                              //    0 = no Extended Gerber
                              //    1 = Extended Gerber with
                              //         standard aperture table
                              //    2 = Extended Gerber with
                              //         dynamic aperture table
      int [0,1];              // Error highlight reset flag:
                              //    0 = keep error highlight
                              //    1 = de-highlight errors
      & int;                  // Returns flashed structure count
      & int;                  // Returns rect. filled structure count
      & int;                  // Returns circle filled structure count
      & int;                  // Returns multi filled structure count
      & int;                  // Returns line filled structure count
      & int;                  // Returns line drawn heat-traps count
      & int;                  // Returns overdraw error count
      );
Description
The cam_plotgerber function generates the Gerber photo plot data for the specified layer and writes it to a file. The function only sets the specified Gerber standard line width, fill mode, and arc output mode plot parameters and reset the error highlight, if no output file name is specified (empty string). The function returns zero for successfully generated plots, 1 for invalid plot parameter specifications (i.e., parameter out of range, no aperture for standard line width, etc.) or (-1) on plot errors. Plot overdraw errors are automatically highlighted.

cam_plothpgl - CAM HP-GL pen plot output (CAM)

Synopsis
int cam_plothpgl(             // Returns status
      int;                    // HP-GL plot layer (LAY1)
      int [1,99];             // HP-GL pen number
      string;                 // HP-GL plot file name
      double [0.1,100];       // HP-GL scaling factor
      double [-1.0,99];       // HP-GL speed ([centimetres/second]) or:
                              //    -1.0 = full speed
      double [0.00001,0.01];  // HP-GL pen width (STD2)
      int [0,1];              // HP-GL area fill mode:
                              //    0 = fill off
                              //    1 = fill on
      int [0,1];              // Error highlight reset flag:
                              //    0 = keep error highlight
                              //    1 = de-highlight errors
      & int;                  // Returns overdraw error count
      );
Description
The cam_plothpgl function generates the HP-GL pen plot data for the specified layer and writes it to a file. The function only sets the specified HP-GL plot parameters if no output file name is specified (empty string). The function returns zero for successfully generated plots or (-1) on plot errors or invalid plot parameter specifications. Plot overdraw errors are automatically highlighted.

cam_setdblpar - Set CAM double parameter (CAM)

Synopsis
int cam_setdblpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Add extra dynamic aperture width, 0.0 clear list (STD2)
                              //    1 = Pixel bitmap resolution (STD2)
                              //    2 = Last bitmap plot pixel ratio
      double;                 // Parameter value
      );
Description
The cam_setdblpar function is used to set CAM Processor double system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The cam_getdblpar function can be used to query parameter values set with cam_setdblpar.
See also
Functions cam_getdblpar, cam_getintpar, cam_setintpar.

cam_setdrlaccuracy - Set CAM drill tool tolerance (CAM)

Synopsis
int cam_setdrlaccuracy(       // Returns status
      double [0.0,0.01];      // Drill tool tolerance (STD2)
      );
Description
The cam_getdrlaccuracy function sets the CAM Processor drill tool tolerance. The function returns nonzero if invalid parameters are specified.
See also
Function cam_getdrlaccuracy.

cam_setgenpltparam - Set CAM general plot parameters (CAM)

Synopsis
int cam_setgenpltparam(       // Returns status
      int [0,4];              // Plot all layers off/on:
                              //    0 = all layer plot mode off
                              //    1 = all layer plot mode on
                              //    2 = plot connected pins/vias only
                              //    3 = plot all pins and connected vias
                              //    4 = plot all vias and connected pins
      int [0,1];              // Plot border off/on flag:
                              //    0 = off
                              //    1 = on
      int [0,1];              // Plot rotate off/on flag:
                              //    0 = rotate 0 degree
                              //    1 = rotate 90 degree left
      int [0,5];              // Plot mirror mode (CAM1)
      int [0,1];              // Plot markers off/on flag:
                              //    0 = off
                              //    1 = on
      double [0.0,0.01];      // Plot accuracy (STD2)
      double;                 // Plot origin X coordinate (STD2)
      double;                 // Plot origin Y coordinate (STD2)
      );
Description
The cam_setgenpltparam function sets the CAM Processor general plot parameters. The function returns nonzero if invalid parameters are specified.

cam_setgerberapt - Set CAM Gerber aperture definition (CAM)

Synopsis
int cam_setgerberapt(         // Returns status
      int [1,900];            // Aperture table index
      int;                    // Aperture D-code:
                              //    10..999 = valid D-codes
                              //       (-1) = delete aperture
      int [0,4];              // Aperture type:
                              //    0 = special aperture
                              //    1 = round aperture
                              //    2 = square aperture
                              //    3 = thermal aperture (heat trap)
                              //    4 = rectangular aperture
      int [0,2];              // Aperture drawing mode:
                              //    0 = aperture for all drawing modes
                              //    1 = aperture for flash structures
                              //    2 = aperture for line structures
      double [0.0,[;          // Aperture dimension/X size (STD2)
      double [0.0,[;          // Aperture dimension/Y size (STD2)
      );
Description
The cam_setgerberapt function sets the definition of the Gerber aperture at the given table index in the aperture table currently loaded to the CAM Processor. A D-code value of (-1) resets the aperture definition at the specified table position. The aperture size is ignored for special aperture types. The function returns nonzero on missing or invalid parameters.

cam_setintpar - Set CAM integer parameter (CAM)

Synopsis
int cam_setintpar(            // Returns status
      int [0,[;               // Parameter type/number:
                              //  [ 0 = use bae_setcolor instead ]
                              //    1 = heat trap base angle
                              //    2 = Warning output mode:
                              //        Bit 0: Supress SCM changed warnings
                              //        Bit 1: not used in CAM Processor
                              //        Bit 2: Suppress variant mismatch warnings
                              //  [ 3 = System parameter - no write access ]
                              //  [ 4 = System parameter - no write access ]
                              //  [ 5 = System parameter - no write access ]
                              //  [ 6 = System parameter - no write access ]
                              //    7 = Generic printer scale mode:
                              //        0 = Fixed scale factor
                              //        1 = Scale to paper size
                              //    8 = Flag - Color table saved
                              //    9 = Airline color mode:
                              //        0 = Use unroutes color
                              //        1 = Use layer color
                              //    10 = Bitmap outline milling mode:
                              //        0 = No Milling
                              //        1 = Draw filled outline with millings
                              //    11 = Generic printer drawing mode:
                              //        0 = Set Color
                              //        1 = Merge Color
                              //    12 = Batch output flag
                              //    13 = Drill tool table optimization flag
                              //    14 = Plot preview mode:
                              //        0 = 0 = None
                              //        1 = 1 = Plotter pen width
      int;                    // Parameter value
      );
Description
The cam_setintpar function is used to set CAM Processor integer system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The cam_getintpar function can be used to query parameter values set with cam_setintpar.
See also
Functions cam_getdblpar, cam_getintpar, cam_setdblpar.

cam_setplotlaycode - Set CAM plot layer code (CAM)

Synopsis
void cam_setplotlaycode(
      int;                    // Layer number (LAY1)
      int;                    // HP-GL plot pen number (CAM4)
      );
Description
The cam_setplotlaycode function selects and/or sets the specified layer-specific HP-GL plot pen number for multilayer plots. The layer-specific HP-GL pen number is also used for non-HP-GL multilayer plots where positive pen numbers denote layers currently selected for output and negative pen numbers denote layers not selected for output.
See also
Function cam_getplotlaycode.

cam_setpowpltparam - Set CAM power layer plot parameters (CAM)

Synopsis
int cam_setpowpltparam(       // Returns status
      double [0.0,0.01];      // Min. distance heat-trap to drill (STD2)
      double [0.0,0.01];      // Min. distance isolation to drill (STD2)
      double [0.0,0.01];      // Tolerance heat-trap to drill (STD2)
      double [0.0,0.01];      // Tolerance isolation to drill (STD2)
      double [0.0,0.02];      // Power layer border width (STD2)
      double [0.0,0.02];      // Power plane isolation width (STD2)
      );
Description
The cam_setpowpltparam function sets the CAM Processor power plot parameters. The function returns nonzero if invalid plot parameters are specified.

cam_setwidedraw - Set CAM wide line display start width (CAM)

Synopsis
int cam_setwidedraw(          // Returns status
      double ]0.0,[;          // Input width value (STD2)
      );
Description
The cam_setwidedraw function sets the current CAM Processor wide line display start width, i.e., the minimum trace width for displaying traces like filled polygons. The function returns nonzero if an invalid width value is specified.
 

C.4.5 CAM View Functions

The following User Language system functions are assigned to caller type CV; i.e., they can be called from the CAM View interpreter environment of the Bartels AutoEngineer:


cv_aptgetcolor - Get CAM View aperture color (CV)

Synopsis
int cv_aptgetcolor(           // Color value (STD18)
      int;                    // Aperture index
      int;                    // Aperture mode
      );
Description
The cv_aptgetcolor function returns the color value which is currently assigned in CAM View for displaying the specified Gerber aperture type.
See also
Function cv_aptsetcolor.

cv_aptsetcolor - Set CAM View aperture color (CV)

Synopsis
int cv_aptsetcolor(           // Returns status
      int;                    // Aperture index
      int;                    // Aperture mode
      int [-33554432,33554431];
                              // Color value (STD18) 
      );
Description
The cv_aptsetcolor function sets the color value to be used in CAM View for displaying the specified Gerber aperture type. The function returns zero if the assignment was successful or nonzero otherwise.
See also
Function cv_aptgetcolor.

cv_deldataset - Delete CAM View data set (CV)

Synopsis
int cv_deldataset(            // Returns status
      int [0,[;               // Data set index
      );
Description
The cv_deldataset function removes the specified CAM View data set from the workspace. The function returns zero if the operation was successfully completed or nonzero otherwise.
See also
Function cv_movedataset.

cv_getdblpar - Get CAM View double parameter (CV)

Synopsis
int cv_getdblpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Input X offset (STD2)
                              //    1 = Input Y offset (STD2)
                              //    2 = Heat trap isolation width (STD2)
                              //    3 = Wide line display start width (STD2)
                              //    4 = Length of one Gerber plotter unit (STD2)
      & double;               // Returns parameter value
      );
Description
The cv_getdblpar function is used to query CAM View double parameters previously set with cv_setdblpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions cv_getintpar, cv_setdblpar, cv_setintpar.

cv_getintpar - Get CAM View integer parameter (CV)

Synopsis
int cv_getintpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Gerber import layer selection mode:
                              //        0 = Assume single flash and line input layer
                              //        1 = Select both flash and line input layer
                              //    1 = Gerber layer query:
                              //        0 = Layer not used
                              //        1 = Layer used
                              //    2 = Display color table/assignment:
                              //        0 = Aperture color table/assignment
                              //        1 = Layer color table/assignment
                              //    3 = Area display mode:
                              //        0 = Filled display
                              //        1 = Outline display
                              //    4 = Via D-Code
                              //    5 = Heat trap base angle
                              //    6 = Gerber Optimization:
                              //        0 = Coordinate optimization off
                              //        1 = Coordinate optimization on
                              //    7 = Gerber Circle/Arc Mode:
                              //        0 = Arbitrary Gerber arc angles
                              //        1 = Max. 90 Gerber arc angles
                              //    8 = Input Mirror Mode:
                              //        0 = Mirroring Off
                              //        1 = Mirroring at X-Axis
                              //        2 = Mirroring at Y-Axis
                              //        3 = Mirroring at Origin
                              //    9 = Zero Supression Mode:
                              //        0 = Suppress leading zeros
                              //        1 = Suppress trailing zeros
                              //    10 = Extended Gerber:
                              //        0 = Extended Gerber (Header) off
                              //        1 = Extended Gerber (Header) on
                              //    11 = Gerber Coordinate Specification:
                              //        0 = Absolute Coordinates
                              //        1 = Incremental Coordinates with Reset
                              //        2 = Incremental Coordinates without Reset
                              //    12 = Gerber Documentary Layer Mode
                              //        0 = Flashes as Documentary Line
                              //        1 = Flashes as Documentary Area
      & int;                  // Returns parameter value
      );
Description
The cv_getintpar function is used to query CAM View int parameters previously set with cv_setintpar. The functions returns zero if the query was successful or (-1) otherwise.
See also
Functions cv_getdblpar, cv_setdblpar, cv_setintpar.

cv_movedataset - Move CAM View data set (CV)

Synopsis
int cv_movedataset(           // Returns status
      int [0,[;               // Data set index
      int;                    // Data set movement mirror flag
      double;                 // Data set movement X offset (STD2)
      double;                 // Data set movement Y offset (STD2)
      );
Description
The cv_movedataset function moves (and mirrors) the specified CAM View data set using the specified offset parameters. The function returns zero if the operation was successfully completed or nonzero otherwise.
See also
Function cv_deldataset.

cv_setdblpar - Set CAM View double parameter (CV)

Synopsis
int cv_setdblpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Input X offset (STD2)
                              //    1 = Input Y offset (STD2)
                              //    2 = Heat trap isolation width (STD2)
                              //    3 = Wide line display start width (STD2)
                              //    4 = Length of one Gerber plotter unit (STD2)
      double;                 // Parameter value
      );
Description
The cv_setdblpar function is used to set CAM View double system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The cv_getdblpar function can be used to query parameter values set with cv_setdblpar.
See also
Functions cv_getdblpar, cv_getintpar, cv_setintpar.

cv_setintpar - Set CAM View integer parameter (CV)

Synopsis
int cv_setintpar(             // Returns status
      int [0,[;               // Parameter type/number:
                              //    0 = Gerber import layer selection mode:
                              //        0 = Assume single flash and line input layer
                              //        1 = Select both flash and line input layer
                              //    1 = Gerber layer usage:
                              //        Read-only parameter!
                              //    2 = Display color table/assignment:
                              //        0 = Aperture color table/assignment
                              //        1 = Layer color table/assignment
                              //    3 = Area display mode:
                              //        0 = Filled display
                              //        1 = Outline display
                              //    4 = Via D-Code
                              //    6 = Gerber Optimization:
                              //        0 = Coordinate optimization off
                              //        1 = Coordinate optimization on
                              //    7 = Gerber Circle/Arc Mode:
                              //        0 = Arbitrary Gerber arc angles
                              //        1 = Max. 90 Gerber arc angles
                              //    8 = Input Mirror Mode:
                              //        0 = Mirroring Off
                              //        1 = Mirroring at X-Axis
                              //        2 = Mirroring at Y-Axis
                              //        3 = Mirroring at Origin
                              //    9 = Zero Supression Mode:
                              //        0 = Suppress leading zeros
                              //        1 = Suppress trailing zeros
                              //    10 = Extended Gerber:
                              //        0 = Extended Gerber (Header) off
                              //        1 = Extended Gerber (Header) on
                              //    11 = Gerber Coordinate Specification:
                              //        0 = Absolute Coordinates
                              //        1 = Incremental Coordinates with Reset
                              //        2 = Incremental Coordinates without Reset
                              //    12 = Gerber Documentary Layer Mode
                              //        0 = Flashes as Documentary Line
                              //        1 = Flashes as Documentary Area
      int;                    // Parameter value
      );
Description
The cv_setintpar function is used to set CAM View integer system parameters. The function returns zero if the parameter assignment was successful, or (-1) otherwise. The cv_getintpar function can be used to query parameter values set with cv_setintpar.
See also
Functions cv_getdblpar, cv_getintpar, cv_setdblpar.
Bartels :: Bartels AutoEngineer :: BAE Documentation :: User Language Programmer's Guide :: System Functions :: PCB Design System Functions

PCB Design System Functions
© 1985-2024 Oliver Bartels F+E • Updated: 20 November 2007, 12:29 [UTC]

© 1985-2024 Oliver Bartels F+E Bartels Homepage Contact and Corporate Info

Web Development by Baumeister Mediasoft Engineering

make this page your Homepage... add this page to your Favorites... send this page to a friend... display printer friendly page... display sitemap... display sitemap with all page contents... PCB-Design-Systemfunktionen - Deutsche Version PCB Design System Functions - English Version